SAFETY & WARNINGS Ensure to read all instructions in this user guide prior to first use. Retain this user guide for future reference. WARNING: When using electric power tools, important safety precautions must always be adhered to in order to reduce the risk of fire, electric shock and personal injury. •...
Page 4
• When the tool is used outdoors, only use extension cords intended for outdoor use and marked accordingly. • Stay alert. Watch what you are doing. Use common sense. Do not operate the tool when you are tired. • Always check for damaged parts before using the tool. If a guard or other part is damaged, these must be carefully checked to ensure that the tool will perform the intended function properly.
Page 5
ASSEMBLY Inserting accessories 1. Always switch the tool off before inserting or removing accessories. 2. Hold the locking button at the front of the tool down and undo the collet chuck (anti- clockwise). 3. Insert the collet that matches the shaft size of the accessory to be used. 4.
OPERATION This rotary tool can be used for drilling, grinding, sanding and polishing, as well as engraving, cutting and removing rust in tight spaces or inaccessible places. The tool can be used on most metals, glass, wood and ceramics. For best performance and results, keep the speed as even as possible without exerting too much pressure.
Page 7
Speed adjustment The speed switch is located on the rear of the tool; turn it to increase or reduce speed. Do not change the speed while the tool is operating. Use the tool at low speed for polishing and similar operations, and high speed for drilling or cutting actions.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...