Related Manuals for Lumber Jack XP Series
Summary of Contents for Lumber Jack XP Series
- Page 1 LSG18G Original Manual Nail Staple Gun Read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
- Page 2 Nail Gun Owner’s Manual & Safety Instructions INDEX 1 - 3. Power Tool & Personal Safety Symbols & Technical Includes 6 - 9. Operation 10. Maintenance 11. Declaration...
- Page 3 Nail Gun Owner’s Manual & Safety Instructions General Power Tool Safety Warnings : Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term ″...
- Page 4 Nail Gun Owner’s Manual & Safety Instructions :The term residual current device (RCD) may be replaced by the term ground fault circuit interrupter (GFCI) or earth leakage circuit breaker (ELCB). Personal Safety a. Stay alert, watch what you are doing and use common sense when operating a power tool.
- Page 5 Nail Gun Owner’s Manual & Safety Instructions power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons un- familiar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
-
Page 6: Technical Data
Nail Gun Owner’s Manual & Safety Instructions Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 6. Symbols a. Some of the following symbols may appear on this product. Study these symbols and learn their meanings. - Page 7 Nail Gun Owner’s Manual & Safety Instructions Includes: Quick change system Flip-flop Aluminum magazine LED Indicator Single/contact firing knob Buckle On/ Off switch Powerful motor Cylinder 10. Depth Adjustment Wheel...
-
Page 8: Operation
Nail Gun Owner’s Manual & Safety Instructions Operation: Inserting and removing the battery pack a) Insert the battery pack into the grip until it clicks in place. b) To remove the battery pack, with pressing the lock buttons simultaneously to pull the pack out of the machine. LED Ligh�ng Led ligh�ng near drive guide can be turned on when the machine is working. - Page 9 Nail Gun Owner’s Manual & Safety Instructions Inserting Staples or Nails into the magazine a) Remove ba�ery pack from the tool. b) Press the release bu�on and pull out the magazine cover. c) Tilt the tool and place nails/staples into the track of the magazine channel.
- Page 10 Nail Gun Owner’s Manual & Safety Instructions Firing next staple or nail, repeat step 2 and step 3 The safety contact pin must be depressed before the trigger is squeezed. Single Firing Mode Contact Firing Mode 2) Contact Firing Mode: Push the drive shi�...
- Page 11 Nail Gun Owner’s Manual & Safety Instructions Depth Adjustment Wheel Turn the depth adjustment wheel towards to , the nail/staple will be fired into wood much more depth ; Turn the wheel towards to , the nail/staple will be fired into wood in less depth.
-
Page 12: Maintenance
Nail Gun Owner’s Manual & Safety Instructions Maintenance: WARNING: Before any work on the machine itself, remove the ba�ery pack from the drill. 1.Inspect bolts periodically. If the bolts loosen, �ghten them immediately, or will result in serious accident. 2.Inspect tool cords periodically. If damaged, have repaired at your nearest Authorised Service Center. -
Page 13: Ce Declaration Of Conformity
Nail Gun Owner’s Manual & Safety Instructions CE DECLARATION OF CONFORMITY TOOLSAVE Unit C, Manders Ind. Est., Old Heath Road, Wolverhampton, WV1 2RP. Tel: 01902 450 470 Declares that the Nail Gun (LSG18G) Is in co mpliance with the regulations included in the Directives:2006/42/EC EC DECLARATION OF CONFORMITY Certifica te for EC-type examination delivered by Intertek Testing Services... - Page 14 Nail Gun Owner’s Manual & Safety Instructions...
- Page 15 UNIT C MANDERS INDUSTRIAL ESTATE, OLD HEATH ROAD, WOLVERHAMPTON www.Lumberjacktools.co.uk...
Need help?
Do you have a question about the XP Series and is the answer not in the manual?
Questions and answers