Clas Ohlson Inflatable LED-Illuminated Santa Instruction Manual

Inflatable LED-Illuminated
Santa
Art.no 36-8421 Model SD1012
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. If you have any questions concerning technical
problems please contact our Customer Services.
Safety
• This product is not intended for permanent installation and
should not be used for more than 30 consecutive days.
• Do not inflate the product in strong wind. If the wind is too
strong to use the product safely – deflate the product, make
sure that it is securely anchored and wait for favourable
weather conditions.
• This product is not a toy. Keep the product out of children's
reach to avoid accidents and electric shocks.
• Protect the electric fan and power cord from exposure to
water to reduce the risk of electric shock.
• Only operate the product using the parts included in the
packaging when purchased.
• Keep the product away from sharp edges and other objects
that might damage it.
• All repairs must be carried out by qualified service technicians
using original spare parts.
• Do not hang decorations or other objects on the product.
• The power cord must not be crushed or damaged; protect it
from sharp edges, oil and heat.
• Do not secure the power cord using staples, nails or other
sharp objects.
• If the temperature falls below −15°C, the fan motor may
stop running. The motor will begin functioning again when
the temperature rises.
• The light sources cannot be replaced. When the light source
has reached the end of its service life, the entire product must
be discarded.
United Kingdom • www.clasohlson.co.uk
Package contents
• Inflatable Santa with built-in fan
• AC/DC power adapter
• Fastening line x 2
• Ground stake x 4
Set up/Assembly
1. Remove the contents from the packaging.
2. Lay the Santa on a clean and level surface.
3. Connect the power cord to the AC/DC power adapter (it only
fits one way) and tighten the connection by screwing on the
lock nut. Plug the AC/DC power adapter into a suitable wall
socket. The fan will begin to inflate the product.
4. Hold the fabric upright and see that the air intake is free and
the zip is closed. If the zip is not completely closed,
the product will not be able to fully inflate.
5. When the product is inflated, stake it to the ground using
the two loops at the bottom of the Santa. Tie the fastening
lines to the loops on the sides of the product and to the two
remaining ground stakes. Push the stakes into the ground.
6. To deflate the product, unplug the AC/DC power adapter
from the wall socket and open the zip. The fan will stop
and the air will escape. Note: Do not unplug the product by
pulling on the power cord – grip and pull the adapter out of
the wall socket.
Care and maintenance
• Clean the product by wiping it with a damp cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
Note: Never wipe the fan motor, only the fabric body of the
product.
• Check the product regularly for holes and tears before they
become too large. Small holes and tears can be mended with
a needle and thread.
• Carefully fold the product and store it in its original packaging.
Store the product in a cool, dry place, out of direct sunlight
and away from other sources of heat.
Specifications
Size (hxwxd) 180 x 120 x 100 cm
Length of cable 2 m
Power adapter
IP rating IP44
Input 220–240 V AC, 50/60 Hz
Output 12 V DC, 12 W, 1 A
Troubleshooting guide
The product does • Check that it is properly plugged into a
not inflate. wall socket.
• Is the wall socket energised?
• Check that the zip is fully closed.
• Make sure that nothing is preventing
the motor from rotating.
• Check that the power cord is properly
connected to the power adapter.
Responsible disposal
This symbol indicates that the product should not
be disposed of with general household waste. This
applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards
caused by incorrect waste disposal, the product
must be handed in for recycling so that the material
can be disposed of in a responsible manner. When
recycling the product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product
is disposed of in an environmentally sound manner.
English