Download
Share
Print this page
  1. Manuals
  2. Brands
  3. twotrees Manuals
  4. 3D Printers
  5. SP-5
  6. Product manual

twotrees SP-5 Product Manual

Hide thumbs

Advertisement

Available languages

Available languages

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the SP-5 and is the answer not in the manual?

Questions and answers

Summary of Contents for twotrees SP-5

  • Page 3 It’s customer-oriented idea, continuous innovation and pursuit of excellence that enable everybody to have wonderful experience in using process. We believe that this manual will be helpful. Hope you enjoy the good time with TwoTrees. If you have any problems, please feel free to contact us via Website: www.twotrees3d.com Facebook: https:/ /www.facebook.com/groups/twotrees3Dprinter/...
  • Page 4 PRECAUTIONS 注意事项 For a better experience in using our product, please read this page carefully. 为了更好地使用我们的产品， 请仔细阅读本页。 1. Please ensure that the packaging is complete before confirming receipt. 确认收货前请确保包装完整； 2. After unpacking, please check the parts list and accessories carefully. 开箱后请仔细核对零件清单及附件；...

  • Page 5: Table Of Contents

    CONTENTS About Your Printer 关于机器 ------------------------------------------ Part List 配件表 -------------------------------------------------- Machine Parameters 机器参数 ------------------------------------------ Assembly Process 安装 --------------------------------------------- Test & Adjust 检测与调整 ------------------------------------------- Error Symbols & Definition 错误标志与定义 ---------------------------- - - - - - - After-Sales Service 售后服务 ------------------------------------ - - - - - -...

  • Page 6: About Your Printer 关于机器

    TWOTREES SP-5 ABOUT YOUR PRINTER 1. T8 Lead Screw Holder 丝杆固定座 2. Double Extrusion wheel 双驱动挤出机 3. Filament Holder 耗材支架 4. Cable Access Cover 走线槽盖板 5. Beam Carriage 横梁马车 6. Extrusion Head Kit 挤出头套件 7. Front Cover 主盖板 8. USB Port USB 端口...

  • Page 7: Part List 配件表

    SP-5 TWOTREES PART LIST 配件表 Foot Pad 脚垫 x 4 M5*10 X 12 M5*16 X 8 M4*12 Screw 螺丝 x 4 2040 Profile 2040型材 X 4 M5*30 Screw 螺丝 X 4 Machine Roof 机顶 X 1 2020 Profile 2020型材 X 2 M5*16 Screw 螺丝...

  • Page 8: Machine Parameters 机器参数

    TWOTREES SP-5 MACHINE PARAMETERS 机器参数 Model 型号： SP-5 蓝宝石 PLUS XY axis positioning accuracy 轴定位精度： ±0.01mm Colour 颜色： Black黑色 Z axis positioning accuracy 轴定位精度： ±0.01mm Print Material 材质： Sheet Metal钣金 material打印材料： PLA, ABS, PETG Wooden Filament 木制耗材 Number of nozzles 喷嘴数量： 1 Filament diameter 耗材直径：...

  • Page 9: Assembly Process 安装

    SP-5 TWOTREES 1.Install the Standing Feet 安装脚垫 Foot Pad 脚垫 M4*12 Screw 螺丝 Turn Over 反转过来...
  • Page 10 TWOTREES SP-5 2. Install The Frames 安装框架 2040 Profile 型材 2020 Profile 型材 Z-axis Linear Rail M5*10 Screw 螺丝 ① Z轴导轨 M5*16 Screw 螺丝 ② Note: The guide rails face inwards. The upper slots of the four main frames are always on the edge.
  • Page 11 SP-5 TWOTREES 3. Install The Beams 安装横梁 M5*30 Screw 螺丝...
  • Page 12 TWOTREES SP-5 4. Install The Roof 安装顶部 Machine Roof 机器顶部 M5*10 Screw 螺丝 ① M5*16 Screw 螺丝 ② ① ②...
  • Page 13 SP-5 TWOTREES 5. Install The Triangle Aluminum 安装三角铝件 Triangle Aluminum T-nut T型螺母 三角铝件 M4*8 Screw 螺丝 Note: After clamping into the slot, tighten the screws. After tightening, the long side of the T -nut should be parallel to the horizontal plane.
  • Page 14 TWOTREES SP-5 6. Install The Heating Plate Supports 安装热床支架 Heating Plate Support M3*6 Screw 螺丝 热床支架 Note: Do not over tight first in case you need to adjust such as installing crookedly 注意： 一开始不要扭太紧，以防之后因为装歪而需要调整这里。...
  • Page 15 SP-5 TWOTREES 7. Install T8 Lead Screws 安装T8丝杆 T8 Lead Screw T8丝杆 Note: Twist the couplings and observe whether the part moves as a whole. 注意：扭动并观察该部分是否作为一个整体移动...
  • Page 16 TWOTREES SP-5 8. Install the T8 Lead Screw Holder and Z-axis End Stop 安装丝杆固定座与Z轴限位开关 T8 Lead Screw Holder T-nut T型螺母 丝杆固定座 M4*8 Screw 螺丝 Note: Do not over tight in case you need to adjust here later. 注意： 一开始不要扭太紧，以防之后还需要调整这里。 Slightly higher 稍微出头...
  • Page 17 SP-5 TWOTREES 9. Install Heating Plate 安装热床 Heating Plate热床 Spring 弹簧 Leveling screw nut Countersunk head screw 调平螺母 沉头螺丝 Insulating Sponge 隔热棉 Roman numerals 罗马数字朝上 Note: The plastic protective layer on the heating plate can be removed. The insulating sponge can be stuck to the back of heating plate (optional).
  • Page 18 TWOTREES SP-5 10. Install The Extrusion Head Kit 安装挤出头套件 Extrusion Head Kit 挤出头套件 Twist the 3 screws off first 先扭下螺丝 Position of the bellow 波纹管的位置如图所示。...
  • Page 19 SP-5 TWOTREES 11. Install The Extruder 安装挤出机 BMG Extruder BMG挤出机 T-nut T型螺母 M4*8 Screw 螺丝 Note: After clamping into the slot, tighten the screws. 注意：卡入槽后，再拧紧螺丝...
  • Page 20 TWOTREES SP-5 12. Fix The Teflon Tube 固定四氟管 Wire Clip 线夹 Teflon Tube 四氟管 x 1 M4*8 Screw 螺丝 x 1...
  • Page 21 SP-5 TWOTREES 13. Install The Filament Holder 安装料架 M4*8 Screw 螺丝 x 2 Filament Holder 耗材支架 x 1 T-nut T型螺母 x 2 Note: After clamping into the slot, tighten the screws. 注意：卡入槽后，再拧紧螺丝...
  • Page 22 TWOTREES SP-5 14. Install X-axis End Stop 安装X轴限位开关 Twist the 2 screws off first. 先扭下螺丝 The end stop is next to the extrusion head kit. 限位开关在挤出头旁边 15. Remove 接线位置 Remove M3*4 screws and open the cover. 取下M3*4螺丝并打开盖子。...
  • Page 23 SP-5 TWOTREES 16. X Axis motor, Y Axis motor, Y End stop X轴电机、Y轴电机、Y限位接线 Profile Cover Strip 型材封条 x 3 The wires goes and hidden inside the groove, then seal with 3 profile cover strips. 接线沿着型材往上，并隐藏在凹槽内，再用3个型材封条扣紧。 → → → 17. Connect the E-axis Motor Wire and Filament Sensor...
  • Page 24 TWOTREES SP-5 18. Connect The Heating Plate Wire and Y Axis End stop Wire 连接热床线和Y轴限位线 Picture 1： Connect ① with ② and connect ③ with ④ 图 1： 将 ① 和 ② 连接， 将 ③ 和 ④ 连接 ① ①...
  • Page 25 SP-5 TWOTREES 20. About the Fan Wire and the X Axis End Stop 关于连接风扇线和X轴限位开关线 No.1 and No.2 wire are both fan wires. 1号和2号线都是风扇线。 They are connected according to the corresponding numbers. 根据对应的数字连接。 X-axis limit switch line is inserted into the X-axis limit switch line.

  • Page 26: Test & Adjust 检测与调整

    TWOTREES SP-5 TEST & ADJUST 检测与调整 1. Tighten the screws of the coupling to ensure the overall linkage of the heating plate when the coupling is twisted 联轴器内的螺丝扭紧，确保扭动联轴器时热床整体 联动 2. Adjust the height of z-axis limit switch 3. Plug in the power and press the switch Z轴限位开关高度调节...
  • Page 27 SP-5 TWOTREES 6. Leveling： 调平 6.1. “Leveling” → click 5 points and Insert a piece of A4 paper to see if it can 6.2. level them one by one slide smoothly, otherwise there is a scratch 依次点击5个点 and you need to rotate the nuts manually 塞一张A4纸，看是否能滑动，如纸上有刮痕,需要手动旋转螺母...
  • Page 28 TWOTREES SP-5 8.2. “Back” → “Extrusion” → “10”mm，Normal，In 8.3. See if the filament is extruded smoothly and 返回 → 挤出 → 10mm， 中速， 推进 evenly 看耗材是否顺滑均匀挤出 Normal 9. Try Printing 尝试打印 ： “Printing” → “TEST-XY2020.gcode” → “Confirm” 打印 → TEST-XY2020.gcode → 确认...

  • Page 29: Error Symbols & Definition 错误标志与定义

    SP-5 TWOTREES ERROR SYMBOLS & DEFINITION 错误标志与定义 Err1: The heating plate exceeds the maximum temperature limit, please check whether the thermal interface is shorted. 热床超过最大温度限制，请检查热接口是否短接; Err2: The nozzle exceeds the maximum temperature limit, please check whether the thermal interface is shorted.
  • Page 30 TWOTREES SP-5 AFTER-SALES SERVICE The guarantee period is 12 months from the date of purchase. 1. Missing/Damaged/Defective Parts Within 7 days of the date of receipt, we will replace any parts for free of charge including shipping fees. After 7 days of the date of receipt, we will replace any parts for free of charge. But you need to pay the shipping fees.
  • Page 32 Thank you for choosing SP-5 www.twotrees3d.com If you have any problems， please contact us via Online Website: www.twotrees3d.com Facebook:www.facebook.com/g roups/twotrees3Dpri nter/ For general i nqui ry: i nfo@twotrees3d.com Fo r a l l se rvi ce: se rvi ce @twot re e s3d.co m...
Save PDF