Streetwize SWWL13 Manual

Buried
Folding
Parking Post
Read and understand these instructions before attempting any
operation of this parking post and retain for future reference!
INTENTION FOR USE
Thank you for purchasing the Streetwize Buired Folding Parking Post. This product is intended
for use as a visual deterrent and protects your vehicle against theft. This parking post can be
used to protect vehicles on driveways, car parks and caravan & motorhome parks.
This parking post can be placed in both hard and soft ground.
PRODUCT ELEMENTS
1. Streetwize Buried Folding Parking Post
2. Heavy-Duty Padlock with 2 keys

INSTALLING INTO SOFT GROUND

Requirements
• Shovel (or other digging equipment or tool)
• Fast drying concrete
• Stone
• Steel trowel
• Spirit Level
INSTRUCTIONS
1. With your shovel, dig a hole into the ground where you want to install the parking
post. When digging, ensure your hole is wide enough for the post and deep
enough for the spigot base (approx. 200mm). Ensure the locking base is
between 2 to 5mm above ground.
2. Use the stone to lay a foundation of around 20mm.
3. Set the spigot-base into the foundation.
4. Use the spirit level to check for vertical alignment.
5. Pour more stone into the base until 40mm below surface. Recheck vertical alignment.
6. Prepare the fast drying concrete.
7. Pour the concrete upto 5 mm below the locking base.
8. Use the trowel and some of the remaining unused concrete for finishing.
SWWL13