Pro Ears The Stealth 28 HT User Manual

The Stealth 28 HT
User's Guide
FITTING INSTRUCTIONS
1.
Select one of the enclosed ear tips based on size of ear canal and
intended purpose of use. The foam tips are intended for maximum
hearing protection and isolation. The silicone tips are primarily for
listening to media or phone calls. You may need to experiment with each
size ear tip to nd the most comfortable and secure t.
2.
Select the proper size ear tip to t your ear canal. Use the largest size
that ts comfortably for most protection. The ear tip should form a
complete seal blocking out sound. This is critical to achieve the highest
NRR rating and protect your hearing.
OPERATING INSTRUCTIONS
POWER ON/OFF
BUTTON
AMPLIFICATION
VOLUME UP
Turning the Unit On and O
1. Short press on the POWER ON/OFF BUTTON to turn the unit on .
The LED will turn green to indicate unit is powered on and hear
through is active.
2. When unit is powered on, short press on the POWER ON/OFF
BUTTON to turn the unit o . The green LED light will turn o .
RELEASE TIME ADJUST
BUTTON
AMPLIFICATION
VOLUME DOWN
Pro Ears Ampli cation & Protection Devices
Improve Hearing amplifying what you want to hear and ltering out noise.
Thank you for choosing the Stealth 28 HT.
We at Pro Ears strive to provide our customers with quality products at an
a ordable price. If for any reason you are not satis ed please contact us and we
will be happy nd a solution.
Please read this User Guide carefully before use.
You'll nd instructions on the use and care of your electronic ear buds.
ALWAYS TEST FIT EARTIP WITH
THE SOUND TURNED OFF
3.
Grip the unit by the ear hooks in both hands. With the controls behind the
head, gently extend the cables until the ear hooks are over the ears. Place
the tips into the ear with a gentle rocking motion until the tips are fully
inserted into the canal.
4.
Test for t with earphone turned o . Clap your hands and listen to the
sound level. If the ear bud tips are the correct size and properly inserted
ambient sound should be signi cantly muted. If not, repeat steps 1-3 with
an alternative size ear tip.
Hear Through Instructions
1. The default sound level when powered on is set at 0 dB of gain.
Compression is always on.
2. Short press on the AMPLIFICATION VOLUME UP/DOWN BUTTON will move
through 6 settings. 3 beeps will sound when reaching the max or min
ampli cation level.
Release Time Settings
1. Short press on the RELEASE TIME ADJUST BUTTON to change modes
between Fast Release and Slow Release time settings.
2. The default setting when the unit is turned on is Slow Release. One beep
will be heard when in Slow Release mode.This mode is more appropriate
to supress continuous loud sounds and echos.
3. A short press on RELEASE TIME ADJUST BUTTON will change to Fast
Release. Two beeps will be heard when the mode is changed to Fast
Release mode. Fast Release setting is more appropriate for impact
sounds.
* * *
COMPONENTS
* 1 Stealth 28 HT
* 3 Pairs silicon tips (S,M,L)
* 4 Pairs foam tips (XS,S,M,L)
* Carry case
* USB-C charging cable
NOTE: