Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Tar River Implements CSP Series
- Page 1 CSP Series Compact Snow Blades Operator’s Manual Rev. 09/22...
- Page 2 CSP Series Snow Blades Page left blank intentionally...
- Page 3 CSP Series Snow Blades TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Tar River dealer. Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Owner’s/Operator’s Manual are completed before releasing equipment to the owner.
-
Page 4: Table Of Contents
CSP Series Snow Blades Table of Contents Introduction …………………………………………………………………………………………….. 5 Technical Specifications ……………………………………………………………………………….. 5 Safety …………………………………………………………………………………………………… 6 Safety Signal Words ……………………………………………………………………………………. 6 General Safety Guidelines ……………………………………………………………………………… 7 Safety Decal Care ………………………………………………………………………………………. 7 Before Operation ……………………………………………………………………………………….. 8 During Operation ……………………………………………………………………………………….. 9 Highway And Transport Operations ……………………………………………………………………... -
Page 5: Introduction
CSP Series Snow Blades Introduction Thank you for purchasing your CSP Compact Snow Blade. The CSP Compact Snow Blade can use a rubber edge as well as a metal edge. The CSP comes standard with a Universal Skid Steer Mount. -
Page 6: Safety
CSP Series Snow Blades Important Safety Information Safety It is important that you read the entire manual and to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification. -
Page 7: General Safety Guidelines
CSP Series Snow Blades Important Safety Information General Safety Guidelines Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment. -
Page 8: Before Operation
CSP Series Snow Blades Important Safety Information How to install Safety Signs: Be sure that the installation area is clean and dry. • Decide on the exact position before you remove the backing paper. • Remove the smallest portion of the split backing paper. -
Page 9: During Operation
CSP Series Snow Blades Important Safety Information During Operation Children should not be allowed on the product. • Clear the area of small children and bystanders before moving the feeder. • If using a towing unit, securely attach feeder by using a hardened 3/4” pin, a metal retainer, and safety •... -
Page 10: Highway And Transport Operations
CSP Series Snow Blades Important Safety Information Highway and Transport Operations Adopt safe driving practices. • Keep the brake pedals latched together at all times. Never use independent braking with machine in tow • as loss of control and/or upset of unit can result. - Page 11 CSP Series Snow Blades Important Safety Information Highway and Transport Operations Maneuver the tractor or towing vehicle at safe speeds. • Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or death. • Avoid loose fill, rocks and holes, they can be dangerous for equipment operation or movement.
-
Page 12: Installing And Removing
CSP Series Snow Blades Installing and Removing Warning: Do not allow anyone to stand between the Quick Hitch and Snow Plow. Serious injury or death can occur. Installing Skid Steer Snow Blade To install: Carefully read the tractor/skid steer or front loader manufacturer’s instructions for installing attachments. -
Page 13: Operation
CSP Series Snow Blades Operation Operating the Snow Plow: The tractor should be properly counter-balanced with weights or a heavy implement attached. A weight box can also be used attached to the tractor 3-point hitch. Make sure all operator’s read the Operator’s Manual and are familiar with all safety rules and regulations. - Page 14 CSP Series Snow Blades Operation Skid Shoe Adjustment: The height of the skid shoes are adjustable adding or removing the included shims. This will reduce the • chance of damage to the blade during snow removal on gravel or loose rock drives.
- Page 15 CSP Series Snow Blades Operation Angling the blade: The attack angle of the Snow Plow should be adjusted to the current conditions. Keep in mind certain • factors will affect the angle of attack; weather conditions, type of surface clearing, depth of snow, etc.
-
Page 16: Maintenance/Service
CSP Series Snow Blades Maintenance/Service DANGER: Stop engine, lock parking brake and remove key before performing any service or maintenance. Never rely on the tractor/skid steer lift system. Place blocks or stands under the Snow Plow to prevent it from falling, causing serious injury or death. -
Page 17: Torque Specifications
CSP Series Snow Blades Torque Specifications Notes: This chart is an approximate estimate of torque values. Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual. - Page 18 CSP Series Snow Blades Page left blank intentionally...
-
Page 19: Parts Breakdown
CSP Series Compact Snow Blades Part’s Manual Rev. 09/22... - Page 20 CSP Series Snow Blades CSP Compact Snow Blade Assembly...
- Page 21 CSP Series Snow Blades ERC Rotary Cutter Frame CSP Compact Snow Blade Assembly Item Part # Description Qty. SSP1001-60 Moldboard - 60” SSP1001-72 Moldboard - 72” SSP1001-84 Moldboard - 84” SSP1001-96 Moldboard - 96” SSM1217530 Bolt countersunk M12-1.75x30 SSP1003 Shock absorber M50 dia x M23 length...
- Page 22 CSP Series Snow Blades CSP Compact Snow Blade Assembly...
- Page 23 CSP Series Snow Blades ERC Rotary Cutter Frame CSP Compact Snow Blade Assembly Item Part # Description Qty. SSP1039 Support foot SSP1040 Support foot lock pin BM2430110 Bolt HH M24-3.0x110 (half-thread) LNM2025 Nut self-locking M20-2.5 FW20 Washer flat M20 BM2025110 Bolt HH M20-2.5x110...
- Page 24 CSP Series Snow Blades ERC Rotary Cutter Frame CSP Compact Snow Blade Hydraulics...
- Page 25 CSP Series Snow Blades ERC Rotary Cutter Frame CSP Compact Snow Blade Hydraulics Item Part # Description Qty. SSP2001 Cylinder SSP2002 Hydraulic hose 10l-1215 SSP2003 Hydraulic hose 10l-1755 SSP2004 Quick change connector (male) G1/2 SSP2005 Pin M25x85 FW24 Washer flat M24...
-
Page 26: Decals
CSP Series Snow Blades ERC Rotary Cutter Frame CSP Compact Snow Blade Hydraulics Item Part # Description Qty. D1001 Decal Caution “To Avoid Serious Injury” D960 Decal Warning “Cancer” 9270112 Decal Caution “To Avoid Injury from Crushing” DECAL1210 TRA small 3.5x2.5... -
Page 27: Warranty
CSP Series Snow Blades Warranty LIMITED WARRANTY Belco Resources Equipment warrants to the original purchaser of any new piece of machinery from Belco Re- sources Equipment, purchased from an authorized Belco Resources Equipment dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and mu- nicipalities’... - Page 28 CSP Series Snow Blades 401 Jeffreys Road Tel: 252-822-7140 Rocky Mount, NC 27804 Fax: 252-787-5855 www.tarrivermfg.com Sales@tarrivermfg.com...