Table of Contents
Advertisement
Quick Links
20V Cordless Telescopic Chainsaw Instruction
After Sales Support
Call 0871 911 7031
Email
customerservice@gardengearonline.
co.uk
Product Code G4801
For correct usage, please read these instructions carefully before use and keep in a
safe place for future reference.
Manual
Thank you for purchasing this
product, which has been made to
demanding high quality standards
and is guaranteed for domestic
use against manufacturing faults
for a period of 12 months from
date of purchase
1
Advertisement
Table of Contents
Related Manuals for Garden Gear G4801
Summary of Contents for Garden Gear G4801
- Page 1 Product Code G4801 for a period of 12 months from date of purchase For correct usage, please read these instructions carefully before use and keep in a safe place for future reference.
-
Page 2: Introduction
INTRODUCTION Congratulations You have made an excellent choice with the purchase of this quality Garden Gear product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards, performance and safety. -
Page 3: Table Of Contents
Contents Introduction Technical specifications Safety information and general warnings Safety symbols and their meanings Description of parts Assembly Adjusting cutting length Adjusting cutting angle Adding lubricant Operating the chainsaw Sharpening the chain Storage Troubleshooting Care and maintenance Li-Ion battery care and maintenance Declaration of conformity Guarantee Technical specifications... -
Page 4: Safety Information And General Warnings
Safety information and general warnings • Remove all packaging and make sure that the product is intact. Do not leave packaging materials like bags and staples within the reach of children and pets. • This appliance is approved solely for use in accordance with the description and safety instructions specified in this user manual. - Page 5 • Do not over reach. Always keep a firm footing and maintain balance during operation, always distribute the weight evenly on your body and reduce the possibility of strain. • Do not use the tool if the switch fails to turn it on and off. Any machine that cannot be controlled with its switch is potentially dangerous and must be checked by a qualified electrician and repaired if necessary.
-
Page 6: Safety Symbols And Their Meanings
Safety symbols and their meanings Read the instruction manual completely before using the power tool. Wear protective equipment such as ear defenders, a dust mask, and gloves. Wear solid, closed shoes with a good grip. Warning! This symbol is displayed on the appliance to remind you of the safety precautions you should take when operating the machine. -
Page 7: Description Of Parts
Description of parts Charger Working head Battery pack Sprocket Switch Oil tank cover Switch lock Oil sealing plate Strap connector Chain bar cover Strap position lock nut Chain tightening ring Fixed tube Cover nut Lock for telescopic tube Chain tightener A Lock for assembly Saw chain Middle casing... - Page 8 WARNING! If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING! Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
- Page 9 Assembling the chain bar and chain Warning! The saw chain has very sharp edges, use thick protective gloves for safety. Loosen the cover nut (20), remove the SDS control system and chain bar cover(18). Please note that the oil sealing plate(17) must on the working head. Position the chain bar(24) onto the working head.
- Page 10 tie straps just touch the bottom of the chain bar rail. Turning clockwise tightens the chain tension. Then check the chain for smooth rotation and proper tension while moving it by hand (wear gloves). If necessary, readjust the chain tightening ring (but loosen the bar cover first). Hold the tip of the bar up and tighten the cover nut securely.
-
Page 11: Adjusting Cutting Length
webbing will enable to release the strap from pole chain saw quickly in case of emergency. Adjusting the cutting length To adjust the cutting length, open the lock trigger of the telescopic tube(8), and adjust to suitable height. Attention: Don’t forget to lock the lock trigger of the telescopic tube(8). -
Page 12: Operating The Chainsaw
Remove oil tank cover. Carefully pour the bar and chain Lubricant oil into the tank. Wipe off excess oil. Check and fill the oil tank when quick view oil indicator is below the MAX indicator line. Repeat as needed. NOTE: It is normal for oil to seep from the saw when not in use. To prevent seepage, empty the oil tank after each use then run for one minute. -
Page 13: Sharpening The Chain
Sharpening the chain Be careful to file all cutters to the specified angles and to the same length, as fast cutting can be obtained only when all cutters are uniform. Tighten the chain tension enough that the chain does not wobble. Do all of your filing at the mid-point of the bar. - Page 14 Storing the chainsaw Clean all foreign material from the product. Store idle unit indoors in a dry and well-ventilated area that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. Always place the scabbard on the saw bar when transporting or storing the pole chain saw.
-
Page 15: Storage
Li-Ion battery care & maintenance Lithium-Ion rechargeable batteries require routine maintenance and care in their use and handling. Read and follow the guidelines to safely use Lithium- Ion batteries and achieve the maximum battery life span. • Do not leave batteries unused for extended periods of time, either in the machine or in storage. -
Page 16: Declaration Of Conformity
Packaging and Waste 2009/125/EC Ecodesign Requirements for Energy-Related Products hereby declare that: Equipment Garden Gear 20V Telescopic Chainsaw Model number G4801 / ASYPCS120020 is in conformity with the applicable requirements of the following documents Ref. No. Chainsaw: EN 55014-1:2017/A11:2020; EN 55014-2:1997/A2:2008; EN IEC 55014-1:2021; EN IEC 55014-2:2021 ;... -
Page 17: Guarantee
GUARANTEE IMPORTANT Please do not return this product without first calling the Customer Service number below: 0871 911 7031* Thank you for purchasing this product, which has been made to demanding high quality standards and is guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase.