Download Print this page

G3 ESCAPIST Instruction Manual page 2

Customizable climbing skins

Advertisement

11. Attach & center skin for sidecut trimming.
12. Align G3 trim tool with ski edge.
The tabs on the trim tool should sit
between the ski base and the skin fabric.
13. Trim from tip to tail along the ski edge,
repeat on both sides.
14. Trimmed skins should reveal both edges.
CARE + STORAGE
Keep skin glue clean.
Thoroughly scrape and brush excess wax from skis.
Do not store your skins on your skis.
Ski Tip
Do not put your
skins on at home.
Thoroughly dry both sides of your skins.
WARRANTY
G3 warrants that the product will meet the specification stated in the instructions and
G3 agrees to repair or replace the product free of charge if the product does not con
form to the specifications. ALL WARRANTIES OF MERCHANTABILITY OR OF FITNESS
FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED AND/OR WAIVED.
For more warranty information go to www.genuineguidegear.com
WARNING
Winter backcountry travel is inherently dangerous. There is always the risk of serious
injury or death. You are solely responsible for your actions and decisions. Familiarize
yourself with the use of this product, its limitations and capabilities. Learn proper
skiing techniques, avalanche awareness and exercise good judgment in conjunction
with using this product properly. Use this equipment and ski at your own risk.
Keep skins in a
cool, dry place.
°
23
+
Do not store on your skis
overnight or long term
Do not expose your skins
to direct sunlight or heat.
X
°
74
C
F
OK
007767
G3-SKN-E023 REV A

Advertisement

loading

This manual is also suitable for:

Escapist universalEscapist glide