Advertisement
Quick Links
Advertisement
Related Manuals for RVsecure ProtectorX
Summary of Contents for RVsecure ProtectorX
- Page 1 RVsecure ProtectorX Operating Manual rvsecure.com.au Made in Australia...
- Page 2 RVsecure Protector Operating Manual Press Description Press 1x System will arm Press 1x No Action Press 1x Change of motion sensitivity Press 1x System will disarm, all strobes / sirens off and reset Press 3x within 10 seconds Programming mode for adding sensors...
- Page 3 (ie passenger/kerb side of those without a door). Tow Direction 1. Press “D” 3x to enter programming mode 2. Press “B” to change. System beeps corresponding to the numbers shown. 3. Press “B” to change again or “D” to exit Door Direction rvsecure.com.au Made in Australia...
-
Page 4: Warranty
Liability 1/ tech7/RVsecure accepts no liability for damage done either to the unit itself, its sub components or to the vehicle due to owners incorrect wiring. If in doubt please consult a professional. - Page 5 Sensors - Supplemental RVsecure offer a number of alarm system sensors that either come as standard in our kits or can be added to one of our systems. PIR Detector PIR stands for Passive Infra Red and works by sensing a change in the infra red radiation. The safeGuard PIR is a wireless detector and is included in both the Protector and Platinum kits.
- Page 6 The VDOS has the same body as the Reed switch and is attached to the inside of the door. VDOS sensors are exclusive to RVsecure. Suitable for: Platinum, Protector Battery: 1x CR2032...
- Page 7 Wired Reed Switch Wired reed switches are used for doors, hatches etc. They activate the alarm when separated. They come in a packet of two. Suitable for: Platinum, Protector, Zero, Defender SKU: RVS_REEDNO rvsecure.com.au Made in Australia...
Need help?
Do you have a question about the ProtectorX and is the answer not in the manual?
Questions and answers