Mustee 360.100 Installation Instructions

360.100
Model:
READ ALL INSTRUCTIONS CAREFULLY AND INSPECT PRODUCT
FOR DAMAGE BEFORE STARTING YOUR INSTALLATION.
Included in Carton

Tools Required

TUB SURROUND
ADHESIVE
OR
SILICONE
ADHESIVE
CARE & CLEANING
The surface of your Entry Ramp may be cleaned with a mild soap solution in warm water using a
soft cloth. When using a cleaner product, carefully read the label to ensure that the cleaner is safe for use on
the material. Stubborn stains can be cleaned using "Soft Scrub®" by Clorox® or a powdered detergent such
as "Spic-n-Span " or a bleach solution – follow bleach manufacturers recommended procedures pertaining to
safety, handling and use of their product. Do not allow cleaners to sit or soak on the surface. Wipe surface
clean and rinse completely with water immediately after cleaner application. Rinse and dry any overspray on
nearby surfaces. Never use abrasive scouring powder or steel wool pads, as they will scratch the surface.

Step 1

Installation Instructions
ENTRY RAMP
60"
OPTIONAL
TOOLS
Turn Entry Ramp upside down and apply an 1/8" bead of
adhesive along each rib and front edge as shown.
E.L. Mustee & Sons, Inc.
Email: info@mustee.com
Web: www.mustee.com
ADA
DESIGNED PRODUCT
Meets ICC A117.1-2017 Standard
7 8"
12"
1 4"
/
STAINLESS STEEL
OR
DECK SCREWS
5431 West 164th St.
Brook Park, OH 44142
Phone: 216.267.3100
Fax: 216.267.9997
/