Matco Tools METAL BLASTER MT2466A Operating Instructions, Warning Information, Parts Breakdown

PulIdOra de chOrrO de arena de metal
SaBleuSe à métal
METAL BLASTER
WARNING
RATED RPM OF THE
RPM RPM RPM
ACCESSORY USED MUST
EXCEED THE MAXIMUM
TOOL RPM SHOWN
ALWAYS READ
INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR HEARING
PROTECTION
ALWAYS WEAR
BREATHING APPARATUS
AVOID PROLONGED
EXPOSURE TO
VIBRATION
Max Free Speed............................................................................................4,000 RPM
Air Inlet ............................................................................................................1/4" NPT
Avg. Air Consumption ........................................................................................3.5 CFM
Sound Pressure Level ........................................................................................ 86 dBA
Recommended Air Pressure .................................................................................90 PSI
Air Hose Size ......................................................................................................3/8" ID
Length .................................................................................................................. 11.2"
Weight ..............................................................................................................2.7 LBS.
Wire Belt Width ....................................................................................................23mm
Wire Diameter (+-) .......................................................................... 0.70 + - 0.015mm
Wire Material .................................................................................................Alloy Steel
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
S P E C I F I C A T I O N S
WARNING
Copyright © Professional Tool Products, 2015
MT2466A
• Operating Instructions
• Warning Information
• Parts Breakdown
MT2466A
All rights reserved