Sleep Mode - Zeegma Vers UV Grand User Manual

The information on the display will appear in the following order: detected
EN
air humidity, humidification level, room temperature, timer (if set).
Control panel description (fig. E)
1. On/off switch
Press this button to switch the device on/off.
2. Automatic humidification level setting
Press this button to set the level of humidification the device will run until it
reaches, after which it will switch off automatically. The settable range is 40%
to 90% humidity. Measurement accuracy is +/-5%. The display will show the
current humidification level after a few seconds.
3. Humidification intensity
Press this button to adjust the intensity of the steam and select one of three
humidification levels.
4. UV
Press this button to activate the sterilising UV lamp, which neutralises harmful
bacteria and germs in the outgoing steam. At the bottom of the display, the
message "UV" will appear.
5. Timer
Press this button to set the time after which the device will switch off
automatically (from 1 to 12 hours).
The above functions can also be activated via the remote control.
Aromatherapy function
To use the aromatherapy function, press in and slide out the essential oil
container (9, fig. A) and then drop the chosen oil into the diffuser. Insert the
container, connect the device to a power source and press the switch.
Only natural essential oils should be used.

Sleep mode

To activate sleep mode, press and hold the switch (1, fig. E). The display will
switch off and the device will continue working. To switch off the sleep mode,
press and hold the switch again.
The above function can be activated using the remote control or the control
panel.