Download Print this page

Troubleshooting Guide - Electrolux 800 Series Operator's Manual

Hide thumbs Also See for 800 Series:

Advertisement

Troubleshooting Guide

Before you call for help, please read the following:
WARNING: ELECTRIC SHOCK HAZARD!
servicing your grinder.
Problem
Grinder will not start when
START button is pushed
Grinder runs or hums but no
coffee is dispensed
Excessive amount of coffee
chaff flying about
Circuit breaker continuously
trips
10
Unplug power cord from outlet before cleaning or
Possible Cause
Bag not under spout.
Plug not in outlet properly.
No power to outlet.
Circuit breaker has tripped.
Shear disc is broken.
Obstruction in opening to grinding
chamber.
Defective chaff mixer spring.
Outlet not properly grounded.
Static electricity.
Insufficient amperage due to use of
extension cord.
Insufficient amperage due to
overloaded line.
Grind setting needs adjustment.
Electrolux
Solution
Place bag underneath spout.
Install plug in outlet.
Check outlet with lamp or radio to verify
outlet has power.
Reset circuit breaker by pushing in reset
button until you hear a click.
Replace shear disc. See Shear Disc
Replacement or instructions on back of
grinder.
Unplug unit. Empty beans out of hopper
and clear obstructions. See Shear Disc
Replacement for disassembly and
assembly instructions.
If bent, broken, or missing, replace spring.
If stuck open with coffee, clean out coffee
to free spring.
Check power cord end and outlet for
proper ground.
Tighten all nuts, bolts, and screws and
verify outlet is grounded.
Plug unit directly into outlet. Do not use.
extension cord.
Designate single line for grinder. Do not
use multi-outlet box.
Adjust grind to coarser setting (see Grind
Adjustment).
800 Series Coffee Grinders

Advertisement

loading