Page 1
- The assembly and operating instructions must be read and understood before using EziVac products. The EziVac is designed to be used in the following manor; Not to be used with flammable liquids. Do not exceed 100psi air supply - this may Manufacturing simple solutions collapse a drum under vacuum.
Page 2
Fit the nitto fitting to the slide valve on the Ezivac. Install the Ezivac into the ¾” drum port. Screw the control knob on the Ezivac all the way out to ensure the Ezivac is set to vacuum. Connect Tube 1 to Tube 2 using the stainless socket.