Summary of Contents for TTI KR-120M
- Page 1 User Guide Digital Electronic Cabinet Lock Model KR-120M NOTE: Please read this entire User Guide very carefully before using the lock and keep the guide in a safe place for future reference. Thank you!
-
Page 2: Section 1: Product Overview
Section 1: Product Overview Front Lock Panel: Key code View of Lock Rear Panel:... -
Page 3: Section 2: Specifications
Lock Installation Diagram Section 2: Specifications Battery: requires 1 button cell battery (CR-2032 / 3V) Battery Life: >5,000 cycles or approximately 1 year in stand-by mode. Working Temperature Range: 5° F (-15℃) to 149 ° F (+65℃) Working Humidity Range: 5% - 95% Section 3: Operation IMPORTANT NOTICE! BEFORE attempting to program any codes for the lock, please carefully read... - Page 4 To unlock the Tool Chest: • Enter a valid 4-digit code plus [OK] on the keypad, the lock will make a long beep sound, the green light will flash, and the digital lock’s turn knob will immediately unlock and remain unlocked. •...
- Page 5 To Change Management Override Code: • Input [OK] [OK] [2] [OK] on the keypad GREEN light blinks • Input [OLD Management Override Code] and [OK] on the keypad • Input [NEW Management Override Code] and [OK] to change the code successfully User Code User Codes provide entry only...
-
Page 6: Section 4: Indicator Sounds And Lights
string of numbers in your User Code in its exact order. • For example, if your user code is [1234][OK] and you wish to use the code protection, you can enter any random pattern of numbers such as [2513*][1234][6*52][OK] to engage the lock. Section 4: Indicator Sounds and Lights •... -
Page 7: Section 6: Troubleshooting
Section 6: Troubleshooting Forgot User Code • Use Management Override Code to unlock o Lock returns to the factory default user code o Program a new User Code -OR- • Use Mechanical Key to unlock o Press the Reset button on the back side of the lock to restore to factory default codes o Program a new Management Override Code and User Code Forgot Management Override Code...