Page 2
Introduction Package List: Smart Plug SP1 (×1) User Guide (×1) Socket Power Button Indicator Sensor Interface (DS18B20) Sensor interface (RS485) Note: The sensor interface is a 3.5 mm audio jack.
Page 3
Indicator Status & Operations When the indicator flashes alternately yellow and blue, it means the device is in the setup mode. When the indicator is constantly blue, the device is powered on and the network is connected. When the indicator is constantly yellow, the device is powered on but the network is disconnected.
Page 4
Quick Start on Mobile Phone STEP 1. Launch the App and log in. Please make sure your phone's Bluetooth is enabled and then click "+" to add a device. STEP 2. Enter device WiFi setup mode: Plug the socket into the power supply, then press and hold the button for 5s until the indicator light flashes alternately yellow and blue.
Page 5
Mobile Data* Setup STEP 1. Insert a Nano-SIM card in the correct direction as instructed. Nano-SIM Slot STEP 2. Launch the App and log in. Please make sure your phone's Bluetooth is enabled and then click "+" to add a device. Please follow the instructions on APP to complete the setup process.
Warranty Information This device is warranted to be free of defects in materials and workmanship for a period of up to one year from the original purchase date. The following situations are not covered by the warranty: Issues arising after the warranty period has ended. ①...