Advertisement
Table of Contents
To Update the firmware:
1. Unzip the file to a location on their hard drive.
2. Connect LDP-600
3. Drag and drop the file ldp600.rom to the Home directory of their LDP-600. Make sure that they
copy it to the root.
4. Once the file is copied, disconnect the LDP-600.
5. Power o
5. Power off and power on the LDP-600.
6. Upon powerup, the LDP-600 will automatically start updating the firmware.
_______________________________________________________________________
Based on user feedback, we have enhanced the features and capabilities of the LDP-600 in the
1.07 update:
These enhancements include:
1. Resume from SD card is now enabled.
1. Resume from SD card is now enabled.
2. Autochange to SD mode is enabled. If you insert a SD card into the SD card slot, the LDP 600
will automatically switchover to the SD card.
3. Bookmark on SD card is enabled.
4. Fixes intermittent performance issues.
Advertisement
Table of Contents
Need help?
Do you have a question about the LDP-600 and is the answer not in the manual?
Questions and answers