Table of Contents
Advertisement
Thank You!
We appreciate you putting your trust in 3D UPfitters to deliver on a new concept in 3D printing.
Yeah, it's just a touchscreen data logger, but we've put a lot of care, countless hours, and
money into taking something we enjoy using and making it available to everyone.
This is a work in progress, and we welcome feedback on how to make operation and
installation as seamless as possible. We depend on customer feedback to help shape this
product's future directions.
Installation and Configuration
Power Cable
Ain't nothing gonna happen 'til you plug it in. The touchscreen comes with a USB-C to USB-A
connector. The USB-C side plugs into the bottom of the case, as shown below. We don't provide a wall
wart as we highly recommend purchasing power strips with built-in USB power. It's crucial that when
you start up the touchscreen, the air is clean, and no 3D prints are running. The VOC sensor will
calibrate that level of VOC as the baseline.
Copyright 2022 3D UPfitters LLC
3
Advertisement
Table of Contents
