TABLE OF CONTENTS IMPORTANT SAFEGUARDS SPECIAL SAFETY NOTES PARTS DIAGRAM PARTS AND FEATURES STARTUP USING THE UNIT CHANGING THE DUST BAG REPLACING THE FILTERS STORAGE INSTALLING SHOULDER STRAP CLEANING AND CARE TROUBLE SHOOTING TECHNICAL SPECIFICATIONS WARNING : This appliance is designed for domestic use only and not for commercial applications.
Thank you for choosing this Durabrand vacuum cleaner. To ensure total satisfaction, read this instruction book carefully. Retain for future reference. IMPORTANT SAFEGUARDS To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other).
PARTS AND FEATURES It is important to know your vacuum cleaner parts and features to ensure the safe use of your cleaner. Parts: 1. Cord Rewind Button 2. On/Off Switch 3. Hose Handle 4. Dust Bag 5. Tube Storage Clip 6.
USING THE UNIT Pull out the power cord to the required length and insert the plug into a suitable wall socket. The yellow marking on the cord indicates a cable length usually sufficient for vacuuming. The red marking indicates that the power cord has been pulled out to its maximum length. Once the red marking is visible, do not pull any further.
IMPORTANT: To avoid damaging the cleaner, do not use it without a dust bag. A safety device is fitted which prevents the cover closing without a dust bag. Do not attempt to force cover shut. If after having changed the bag the suction is still irregular and the bag full indicator stays red, check that there is no blockage in the hose, tube or air intake, and that the bag is installed properly.
Cord won't re-wind - Dirty power cord - Clean the power cord - Cord jammed - Pull out cord and re-wind TECHNICAL SPECIFICATIONS Model CVA003 Max Power 1200 W Voltage 120 Volts Dust Capacity (L) Cord Length 5m / 16ft Weight 2.3kg / 5.1lbs...
Page 10
TABLE DES MATIÈRES CONSIGNES DE SÉCURITÉ AUTRES RENSEIGNEMENTS IMPORTANTS SUR LA SÉCURITÉ PIÈCES PIÈCES ET CARACTÉRISTIQUES DÉMARRAGE MISE EN MARCHE DE L'APPAREIL REMPLACEMENT DU SAC À POUSSIÈRE CONSEILS IMPORTANTS REMPLACEMENT DES FILTRES INSTALLATION DE LA BANDOULIÈRE RANGEMENT NETTOYAGE ET ENTRETIEN GUIDE DE DÉPANNAGE SPÉCIFICATIONS TECHNIQUES: MISE EN GARDE: Le présent appareil est destiné...
Merci d'avoir choisi un aspirateur Durabrand. Afin d'en tirer toute la satisfaction possible, veuillez prendre le temps de lire attentivement ce manuel d'instructions, et conservez-le afin de pouvoir le consulter au besoin. CONSIGNES DE SÉCURITÉ Pour diminuer les risques d'un choc électrique, cet appareil est muni d'une fiche polarisée (une lame plus large que l'autre), qui ne s'adaptera que d'une seule façon à...
PIÈCES ET CARACTÉRISTIQUES Il est important de pouvoir reconnaître les pièces qui constituent votre aspirateur et les caractéristiques qui lui sont propres afin que vous puissiez utiliser l'appareil en toute sécurité. Pièces : 1. Bouton de rembobinage du cordon d'alimentation 2.
MISE EN MARCHE DE L'APPAREIL Retirez une longueur suffisante de cordon d'alimentation et insérez la fiche dans une prise murale convenable. La marque jaune indique la longueur qui convient habituellement à l'utilisation d'un aspirateur. La marque rouge signifie que le cordon d'alimentation est rendu à sa limite. Une fois la marque visible, il faut arrêter de tirer.
CONSEILS IMPORTANTS Pour éviter d'endommager l'aspirateur, ne l'utilisez jamais sans sac à poussière. Un dispositif de sûreté vous empêchera de fermer le couvercle si vous avez oublié d'installer un sac à poussière. Ne poussez pas de force pour fermer le couvercle. Si la succion vous paraît inégale après avoir changé...
Le cordon ne se rembobine Le cordon est sale Nettoyez le cordon Le cordon est bloqué Retirez le cordon et rembobiner de nouveau SPÉCIFICATIONS TECHNIQUES: Modèle CVA003 Puissance maximum 1200 W Tension 120 Volts Capacité poussière Longueur du cordon 5m / 16pi Poids 2.3 kg / 5.1lb...