Advertisement
Quick Links
QUICK
REFERENCE GUIDE
Tableau Forensic TD2u
GETTING STARTED
Confirm that the Duplicator is off before beginning.
1. Source Drive – Connect one drive to the Duplicator's source side:
SATA, IDE, USB 3.0, or SAS*
* Tableau Duplicator SAS Expansion Module [TDP6] (sold separately) is
needed for SAS drives.
2. Destination Drive(s) – Connect up to two SATA drives and one USB 3.0 drive
to the Duplicator's destination side
3. Duplicator Power – Connect the power supply to the Duplicator's DC In
4. Power On - Press the power button
Before disconnecting a source or destination drive, we recommend powering
down the Duplicator.
Setup Wizard: During the initial start-up or following a factory reset, the Setup
Wizard will prompt you to configure the default system settings of the Duplicator.
USB 2.0 Device Port (Optional) – Connect a USB storage device to save logs or a
USB keyboard for easier data entry via the USB 2.0 port
USB 2.0 Update Port – To update the firmware, connect the Duplicator to your
computer via the mini USB port
and begin operation
and use the Tableau Firmware Update utility.
Advertisement
Related Manuals for OPENTEXT Tableau Forensic TD2u
Summary of Contents for OPENTEXT Tableau Forensic TD2u
- Page 1 QUICK REFERENCE GUIDE Tableau Forensic TD2u GETTING STARTED Confirm that the Duplicator is off before beginning. 1. Source Drive – Connect one drive to the Duplicator’s source side: SATA, IDE, USB 3.0, or SAS* * Tableau Duplicator SAS Expansion Module [TDP6] (sold separately) is needed for SAS drives.
- Page 2 For a comprehensive overview of the TD2u features and functions, see the Tableau Forensic TD2u User Guide. FIRMWARE UPDATES OpenText releases free firmware updates for Tableau forensic products through the Tableau Firmware Update (TFU) utility. Reference the TFU webpage for more information: https://security.opentext.com/tableau/download-center...