140°F (50°C). Do not leave the device in your car during summer months, as temperatures inside the car can exceed the outdoor temperatures. • After each use, store your device and its accessories in the MiTAMA bag.
Contraindications! MiTAMA™ is safe for everyone except for those: …who are pregnant. …with a defibrillator or pacemaker. …with seizure disorders. …with past or present cancer history. DO NOT place electrodes across the temples.
Before You Begin Read this manual in its entirety. Please watch the training video found on the MiTAMA™ Deluxe thumb drive that is in the bottom drawer of your box. Rotate to open Connector...
MiTAMA Power Facial ™ Massage - Exfoliate & Tone...
Page 10
Power Facial Preparation ™ Massage - Exfoliate & Tone What you need: 1. MiTAMA Deluxe™ device 2. Multi-task lead wire 3. Two 2x2 cutaneous electrodes 4. TAMA Therapy Gel™ (optional) 5. Massage Pro™ gloves 6. Plastic vinyl or nitrile gloves (not shown)
Page 11
Power Facial Connection ™ Massage - Exfoliate & Tone Electrode lead plugs in here • Plug the multi-task leads into the Output Port, as shown. • Connect the electrode pads into the two red leads, and the gloves into the two white leads.
Page 12
Power Facial Procedure ™ Massage - Exfoliate & Tone 1. Thoroughly cleanse skin with preferred cleanser. 2. Place adhesive Electrode Pads under clavicle. You may place TAMA Therapy Gel™ underneath the pads for added comfort. 3. Put vinyl or nitrile gloves on hands, followed by Massage Pro gloves.
Program Selection Next Program Power Switch Prev. Program Program 1: Droopy Skin and Muscles Program 2: Lack of Skin Integrity Program 3 Program 1 Program 2 Program 3: Touch-Less Therapy 20 minutes 10 minutes 10 minutes 4. Turn the power switch to ON position. 5.
Page 14
Power Facial Procedure ™ Massage - Exfoliate & Tone (cont.) 8. Wet glove fingertips using TAMA Tonic™, this helps optimize the conductivity of current when touching the skin. The natural texture of the gloves exfoliates the skin as you massage the skin. You may also use TAMA Therapy Gel™ under gloves as a conductive medium for ease of movement and less exfoliation.
Page 16
Touch-Less Therapy Preparation ™ Mask Infusion – Hydrate & Lift What you need: 1. MiTAMA Deluxe™ device 2. Electrode lead wire 3. One 2x2 cutaneous electrode 4. One 2x4 cutaneous electrode 5. One TAMA Essence™ Mask 6. TAMA Therapy Gel™ (optional)
Page 17
Touch-Less Therapy Preparation ™ Mask Infusion – Hydrate & Lift 1. Plug your electrode leads into the Output Port, as shown. 2. Connect the electrode pads to the red and Electrode lead plugs in here white leads. 3. Thoroughly cleanse skin with preferred cleanser.
Page 18
Touch-Less Therapy Procedure ™ Mask Infusion – Hydrate & Lift (cont.) 5. Apply large adhesive electrode to clavicle directly over the skin. You may place excess gel from the mask packaging – or TAMA Therapy Gel™ - underneath the pad for added comfort.
Page 20
TAMA Touch-Less™ Preparation Hand Rejuvenation What you need: 1. MiTAMA Deluxe™ device 2. Multi-task lead wire 3. Two 2x2 cutaneous electrodes 4. TAMA Therapy Gel™ (optional) 5. Massage Pro™ gloves...
Page 21
• Note: gloves must be damp to conduct. Use a cap-full of TAMA Tonic™ with a glass of warm water. • Set MiTAMA to Program 3, see Page 13. • Client can be sitting or laying down for this treatment.
Page 22
TAMA Touch-Less™ Applications Add-on Services • Other services may be used as add-on to TAMA, such as LED, laser, ultrasound, micro-needling, waxing, tattooing, eyelash extension, or other facial treatments. • Do not use High Frequency or other electrotherapy machines while performing TAMA Therapy modalities, as the two energies will cause interference and reduce the efficacy of both treatments.
• Thoroughly cleanse skin with preferred cleanser. • Open the TAMA Essence™ Mask packet, unfold and lay mask onto skin. Apply the excess product from the packet onto neck and décolleté. • Set MiTAMA to Program 3, see Page 13.
Flow of Energy The Key to a Successful Treatment Flow Light Indicator • The last LED located on the “eye” indicates Energy Flow. • This unique, patented technology analyzes the skin tissue in real time as the treatment is being delivered. •...
Setting the Current Level 500μA 400μA Increase 300μA 200μA Decrease 100μA There are five LEDs that indicate the current level. • Each LED represents 100μA with maximum setting of 500μA. • Lower current intensity helps with detoxing while the higher current helps •...
Treatment Timer Treatment Timer Indicator • This LED is a precise internal timer that keeps track of the treatment progress. • This LED blinks once every 2 seconds when electrodes are touching the face (Flow light is on). This light stops blinking and turns off if the electrodes come off and do not touch the body.
Battery Level 100% Low Battery • During treatment, the first three LEDs are dedicated to the device’ s battery level. • To ensure uninterrupted treatments for several sessions, it is a good idea to charge your device when the light indicates 50%.
TAMA for help. Use of other chargers can destroy your device and void your warranty. Device is inoperable when the charging cord is plugged in - even when it is not connected ➢ to the wall. Unplug the charger wire from MiTAMA port before performing treatment.
The sophisticated aroma of Rosa Damascena creates a soothing wellness experience. PLEASE NOTE: We cannot recommend the use of non-TAMA masks or skincare products during your MiTAMA™ treatment, as we are unable to guarantee results or safety.
8. Can I retail MiTAMA Homecare devices? Yes, we have 4 different devices to choose from. Please contact us for wholesale pricing. Join our MiTAMA™ Community on Facebook and encourage your clients to join as well for the latest news and insights: www.facebook.com/groups/TAMAcommunity...
TAMA Research Limited Warranty TAMA Research Corporation warrants the MiTAMA™ device for a period of one (1) year from the date of purchase to be free from defects in manufacturing and workmanship subject to the following conditions, exclusions, and exceptions. In order for the warranty to be valid, the product must be used according to this operation manual (“Intended Use”), under Normal Settings, and only with approved...
Page 34
Use of unapproved chargers and charger cables, or accessories other than those provided by TAMA. Forcing the accessory plugs into the wrong receptacle, thus damaging the connectors on the MiTAMA™ device. Damage caused by water exposure, condensing moisture, cleaning agents, and/or oily substances. Tampering with the device.
Page 36
Beauty is a frequency. TAMA connects you to its Power!™ TAMA Research Corporation Email: mail@tamaresearch.com Phone: 602-354-8185 Web: tamaresearch.com Social: @tamaresearch Join our MiTAMA Community Facebook page for helpful insights, instructions & support from some of our leading TAMA professional providers.
Need help?
Do you have a question about the Deluxe and is the answer not in the manual?
Questions and answers