Advertisement
Prepared for Matching a Better Life
INSTALLATION OF SAUNA ROOM BODY
1. Place the floor panel on a levelled floor (Note: The floor panel must be levelled before
installing walls and ceiling panels. If the ground is not level, you may need to shim the
bottom panel to get levelled.) (see picture 4)
2. Place back panel in the slot of floor panel. (see picture 5)
3. Place the left-side panel in the slot of floor panel. (see picture 6)
4. Place the right-side panel in the slot of floor panel. (see picture7)
picture 4
5. Place the Bench Support panel and connect the wires behind (see picture 8）
6. Place the Bench surface panel (see picture 9)
7. Place the front-panel in the slot of floor panel. (see picture 10)
picture 8
picture 5
picture 9
P 5 / 9
xmatch_service@163.com
picture 6
picture 10
picture7
Advertisement
