ABB CP410M Installation And Operation Manual page 2

CP410 Installation and Operation Manual
Foreword
CP410 is a Human Machine Interface (HMI) with a 3" STN Liquid Crystal
Display, and is water- and dust-resistant according to IP65/NEMA 4X (indoor
use only).
CP410 is CE-marked and meets your need to be highly transient-resistant while
in operation.
Also, its compact design makes connections with other machinery more flexible,
thus achieving the optimal performance of your machines.
CP400Soft is used to design applications of CP410; it is reliable, user-friendly
and compatible with many models.
Copyright © ABB
All rights reserved.
Release: Sept. 2008
Document number: ABB, 1SBC159101M0202
Please read the entire installation manual prior to installing and using this equipment.
Only qualified personnel may install, operate or repair this equipment. ABB is not responsible for modi-
fied, altered or renovated equipment.
Because the equipment has a wide range of applications, users must acquire the appropriate knowledge to
use the equipment properly in their specific applications.
Only parts and accessories manufactured according to specifications set by ABB may be used.
ABB SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE INSTALLATION, USE
OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT, CONTRACT, OR OTHER-
WISE.
BUYER'S SOLE REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND OF PUR-
CHASE PRICE, AND THE CHOICE OF THE APPLICABLE REMEDY SHALL BE AT THE SOLE
DISCRETION OF ABB.
ABB, 1SBC159101M0202
Foreword