Table of Contents Introduction ................3 Product Identification ..............3 Warnings ...................4 Important Information Before Use ..........5 Description of LCD Display ............6 Battery Installation ..............7 Switching Between Fahrenheit or Celsius ........8 Switching Between Measuring Modes ........8 Tips for Measuring Body Temperature ........9 Measuring Body Temperature ..........9 Measuring Food/Liquid Temperature ........
Introduction The Evenflo PreciseRead Touchless Forehead Thermometer is intended for home use and the measurement of body temperature for people of all ages. Accurate: Patented Infrared PreciseRead proximity sensor (°F/°C) Versatile: 2-in-1 multi-use thermometer measures Body Temperature and Food/Liquid Temperatures...
WARNING! • Product is intended to be used by adults. This product is not a toy. DO NOT allow children to play • with it. • Please keep away from children and pets because small parts may be inhaled or swallowed. •...
11. Avoid using this thermometer near an operating cell phone or microwave oven. 12. For assistance with setup, use or maintainance of this thermometer, please contact ParentLink at 1-800-233-5921. 13. Report any serious incidents involving this thermometer to Evenflo by calling ParentLink at 1-800-233-5921.
Description of LCD Display Measuring Sequence In Process Night Mode (beeps muted) Body Temperature Mode Food/Liquid Temperature Mode Measurement Degree Temperature Scale (°C or °F) Low Battery Indicator Frowning Face with Red Backlight: Temperature is 100.4ºF (38°C) or higher Smiling Face with Amber Backlight: Temperature is 99.5 - 100.3°F (37.5 - 37.9°C) Smiling Face with Green Backlight:...
Battery Installation WARNING! • RISK OF EXPLOSION! » NEVER mix old and new batteries, batteries of different brand types, or incorrect battery type. » NEVER dispose of batteries near children, heat, or in normal household waste. • Properly dispose of used batteries immediately in accordance with EPA Standards that can be found at www.
Switching Between Fahrenheit or Celsius Your thermometer can display results in degrees Fahrenheit (°F) or degrees Celsius (°C). To switch from °F to °C and back, simultaneously hold down the Memory and Mode buttons on the side of the thermometer until you hear a beep. Switching Between Measuring Modes To switch between the thermometer’s four measuring modes (shown below), press the Mode button on the side of the device.
Tips for Measuring Body Temperature • Before taking a temperature measurement, the thermometer should be acclimated to room temperature for 30 minutes. • Attempting to take temperature readings from sites on the body other than the forehead may produce inaccurate results.
Page 10
Position the thermometer approximately 1 inch (2.5 cm) from the center of the patient’s forehead with the sensor aimed between the eyebrows. 1” (2.5 cm) 1” (2.5 cm) Press and release the Power Button. Slowly move the thermometer toward or away from the forehead until you have reached the correct distance.
NOTE: If the temperature measurement is 100.4°F (38°C) or above, the Frowning Face and Red Backlight will be accompanied by a Fever Alarm. This Fever Alarm will only occur in Body Temperature Mode. The Fever Alarm will not occur in Body Temperature Night Mode. About 60 seconds after use, the thermometer will automatically beep and shut off.
Memory Function Memory Recall: You can recall up to 10 measurements currently stored in memory to share with your physician or trained healthcare professional. With the thermometer turned on, briefly press the Memory Button to display the most recent temperature measurement.
Cleaning and Disinfecting For home use device disinfection, 75% alcohol (available in the pharmacy) can be used. • Measurement Sensor: Clean the measurement sensor with an alcohol swab before and after each measurement. • Thermometer: Use a soft, dry cloth to clean thermometer body.
EMC Tables 60321000/NT6/NT66 is intended for use in the electromagnetic environment specified below. The customer or the user of 60321000/NT6/NT66 must make sure that it is used in such an environment. Guidance and manufacturer’s declaration - Electromagnetic emissions HOME Phenomenon Professional healthcare facility environment a) HEALTHCARE ENVIRONMENT a)
Page 16
Guidance and manufacturer’s declaration - Electromagnetic immunity - Enclosure port Phenomenon Basic EMC Immunity test levels standard or test HOME HEALTHCARE method ENVIRONMENT Professional healthcare facility environment ELECTROSTATIC IEC 61000-4-2 ± 8kV contact DISCHARGE ± 2 kV, ±4kV ±, ±8 kV, ±15 kV air Radiated RF EM fields IEC 61000-4-3 10 V/m b) 80MHz - 2.7 GHz...
Explanation of Symbols Manufacturer Date of manufacture (YYYY-MM-DD) Temperature limits Humidity limitation Atmospheric pressure limitation WARNING! Consult the instruction for use Power This product meets the basic safety and essential performance requirements indicated in the IP22 conditioning test (protection against solid foreign objects of 0.5”...
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty.
Page 20
1-800-233-5921 8 am - 5 pm EST Manufactured in China by AViTA (WuJiang) Co., LTD. Distributed in the U.S.A. by Evenflo Company, Inc. Model No.: NT6 Manufacturer: AViTA (WuJiang) Co. LTD. Tel: +86-512-8207-8288 Add.: No. 858, Jiao Tong Rd., WuJiang Economic Development Zone, Suzhou City, Jiangsu Province, P.R.C.