IMPORTANT INFORMATION VIKTIG INFORMASJON The warranty of the heater will not cover any damage caused by non-observance of any of these instructions. Garantien til varmeren dekker ikke skader forårsaket av manglende overholdelse av noen av disse instruksjonene. The instructions should be retained for future reference. This guide must be kept and given to any new owner. Instruksjonene bør beholdes for fremtidig referanse.
Page 4
IFP heater is an IP34 rated appliance enabling it mounting outdoors. Anyway, the heater is not intended for installation in locations that are permanently wet or humid or exposed to rainfall or snowfall. It should be installed in a location where it is sheltered from the effects of weather.
Page 5
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE HEATER ADVARSEL: FOR Å UNNGÅ OVEROPPHETNING, IKKE TILDEKK VARMEELEMENTET...
Page 7
Step2: assemmble heater cross the pole and base. Swith instruction O: Power ON/OFF I: 50% power II:100% Power...
Page 8
Step3: Cable connect L: BROWN FIRE LINE N:BLUE NULL LINE E:GREENYELLOW GROUND LINE Note: The heater has a tip over 45℃ angle function. Once heater over the angle, the heater will be automatically stop working. WARNING: Ensure that the supply cables is well mounted and that it does not come in contact with the reflector of the heater or that it does not trail into a heated area.
When the appliance is not operated for a long period of time, cleaning or maintenance is conducted or when the location of the heater is changed, the heater should be turned OFF and unplugged from the electrical connection. THECNICAL DATA Model SS-PLUS Power 2000 W Voltage 220 – 240 V...
Page 10
EU member states. Norsk importør: Konsulent Team as Håndverksveien 2 2069 Jessheim e-mail Post@elflex.no Telefon 63942680...
Need help?
Do you have a question about the SS-PLUS and is the answer not in the manual?
Questions and answers