Advertisement
ROMAC
INDUSTRIES,
INC.
Thank you for purchasing the Transmate Air Power
Drive. This drive will give you years of service if the
instructions below are followed. Please read the
accompanying Ingersoll Rand Air Motor instructions
for care and maintenance of the air motor. Clean
air and proper motor lubrication are essential for
longevity of the air motor. If you have any questions,
please call us at 1-800-426-9341
If the following key points are NOT followed this air motor
will be damaged. Please read the cover sheet and IR
motor manual before using this drive.
•
Use only clean, dry, lubricated air to drive the motor.
•
Air tool oil in the air supply is essential. Make sure air
oil lubricator is filled with air tool oil.
•
Locate the air oil lubricator as close to the drive as
possible.
•
Clean air is essential. Make sure your filters are
clean.
•
Sand or dirt entering the air motor will destroy it.
Make sure no sand or dirt enters this motor.
21919 20th Avenue SE • Suite 100 • Bothell, WA 98021 • Phone (425) 951-6200 • 1-800-426-9341 • Fax (425) 951-6201
Transmate
Air Drive
371-00
Warning
Operating Manual
Air Drive Manual
Page 1
Advertisement
Table of Contents
Summary of Contents for Romac Industries Inc. 371-00
- Page 1 INDUSTRIES, INC. Operating Manual Transmate Air Drive 371-00 Thank you for purchasing the Transmate Air Power Drive. This drive will give you years of service if the instructions below are followed. Please read the accompanying Ingersoll Rand Air Motor instructions for care and maintenance of the air motor.
- Page 2 ROMAC INDUSTRIES, INC. Operating Manual The Transmate Air Power Drive (371-00) for use with the TapMate Drilling Machine (350-00) 11/24/03 Revision 3.0 The Air Drive is driven by an external compressor with the following minimum requirements: Air Output: 36 CFM (cubic feet per minute) Pressure Output: 90 p.s.i.
- Page 3 ROMAC INDUSTRIES, INC. Operating Manual Shutdown and storage Procedure Turn off the air intake supply and remove the Air Drive from the drilling machine. Disconnect the air source from the drive. Remove the muffler from the 45-degree street elbow. Use clean, dry air at low pressure to “flush out” condensates, such as water. WARNING: Solid or liquid material exiting the unit can cause eye or skin damage.
- Page 4 ROMAC INDUSTRIES, INC. Operating Manual Air Drive Manual 21919 20th Avenue SE • Suite 100 • Bothell, WA 98021 • Phone (425) 951-6200 • 1-800-426-9341 • Fax (425) 951-6201 Page 4...
Need help?
Do you have a question about the 371-00 and is the answer not in the manual?
Questions and answers