Advertisement
Quick Links
Advertisement
Summary of Contents for FLEETLOGIC TRACKnTAG TAG-HAWK
- Page 1 Installation Instructions (with new jumper)
-
Page 2: Basic Installation
TAG-HAWK is suitable for Trailer Roof & External mount + installation. The units are assembled and rigorously stress tested by FLEETLOGIC Co Inc (Philippines) to ensure the units meet the standards required from one of our TRACKnTAG products. The below will introduce you to what is supplied, and how to install. - Page 3 2. To connect to the trailer, use the following wiring: Tautliner or Pantech • When installing on a Tautliner or Pantech, connect to the VCC+ (Park lights +) wire which is usually Brown with most trailers. The power source can be 9-40volts. •...
- Page 4 Terminal access explained: • 1. (DO1) Negative digital output. This activates a standard relay. • 2. (DC Detect) DC power trigger to wake unit manually • 3. (Solar -) GND from external Solar panel if installed • 4. (VCC-) GND from trailer •...
- Page 5 Mounting Mounting is best done using Sikaflex 221 (Black). By applying a generous amount to each of the 4 disks under the tracker, it will be ample and withstand the required forces. Applying excess to other parts of the tracker will not achieve any benefit.
- Page 6 We offer a full 24 month warranty on all products. Please refer to our website for more detail…. https://fleetlogic.co/warranty-policy/ Thank you for choosing one of our TRACKnTAG products. is a product brand of Australia – FLEETLOGIC Co Pty Limited – (R&D and Hardware support) australia@fleetlogic.co Philippines – FLEETLOGIC Co Inc (Assembly and testing –...