Peco Services MediHeat V1200DT Operating Instructions

MediHeat V1200DT
Description
The V1200 Recovery Chamber is an electronically controlled warm air cabinet, designed to aid the post
operative recovery of small animals/mammals and act as an avian hospital cage. It can also be used as an
IV fluid warming cabinet or as a laboratory warm air cabinet.
The cabinet is constructed from tough ABS plastic, and has a ventilated perspex door for a clear view of the
inside. It is designed to be used either lying on its back or standing upright.
A digital thermostat accurately controls the internal air temperature, adjustable between approximately 10 &
50°c, which is displayed on a digital module. An indicator light shows heater operation.
For IV bags, aluminium shelves can be purchased to fit the moulded ridges. Please speak to your supplier
or visit our website www.pecoservices.co.uk and search for part number V1200S.
Specification:
Power
Voltage
Protection
Standard
Technical Data
The mains lead fitted to this device is of type Z attachment. This means that if the lead is damaged in any
way it cannot be replaced and the device should be returned to the manufacturer for repair.
The device does not need an Earth connection.
Peco Services Ltd, Brough, Cumbria, CA17 4BG, England Tel/Fax 44 (0)17683 41111
Veterinary Recovery Chamber/
Laboratory Warm Air Cabinet
Operating Instructions
120w
240v ~ 50/60Hz
IPX0
BS EN60335 & BS 5724 Part 1
info@pecoservices.co.uk www.pecoservices.co.uk