Related Manuals for paco PV2412-50
Summary of Contents for paco PV2412-50
- Page 1 CONVERTS 24 VOLT DC INTO 12 VOLT DC POWER DC TO DC CONVERTER SWITCHMODE INSTRUCTION MANUAL Please read user manual before use.
- Page 2 THIS PRODUCT IS SUITABLE FOR USING DC ELECTRICAL APPLIANCES. 1. DESCRIPTION FIG 1 Rear (50,000mA-100,000mA) LED Digital Display Screen VOLTS LOAD % Output Voltage Output Load % Power On STATUS Fault On/Off Switch Status LEDs Voltage & Load % Selection Button FIG 2 Front (50,000mA-100,000mA) POS.
- Page 3 2. INDICATING SIGN Model: PV2412-50 PV2412-60 PV2412-100 Green illuminated led: Power switch "on" converter standby. Green unlighted: Power switch "off ". When red illuminated on: converter is at fault.. When the yellow lights on: indicating the converter's output voltage situation or output load in percentage.
-
Page 4: Operation
3．CONNECTION Please verify if you have chosen the right operating voltage for both input and output. Connect the red cable from the "+" terminal (red terminal) of the battery to the + binding post (red connection) of the converter and the black cable from the "-"... -
Page 5: Output Capacity
Model: PV2412-50 PV2412-60 PV2412-100 "Turn on" secondly VO LTS LO AD O ut pu t Vo lta O ut pu t Lo ad Po w er Fa ul t ST AT US BLACK BLACK "Turn on" BATTERY BATTERY firstly When connecting an electrical appliance to the converter, please make sure that the rating power of the appliance does not exceed the rating power of the converter. -
Page 6: Mounting Instructions
7. MOUNTING INSTRUCTIONS Converters are designed for indoor, out of weather use only. Ensure that both converter and battery are in a well-ventilated space during charging. The converter end plates include a mounting flange for easy mounting. If permanently fixed, the converter should be mounted to a suitable horizontal or vertical panel, with at least 10cm clearance from the end plates to provide adequate ventilation for the cooling fan. -
Page 7: Maintenance
Always keep the converter in an environment which is: (A)Well-ventilated (B)Not exposed to direct sunlight or any other heat source (C)Inaccessible to children (D)Safe from water/moisture, oil or grease (E)Safe from any flammable substance 9. MAINTENANCE Very little maintenance is required to keep your converter operating properly. You should clean the exterior of the unit periodically with a damp cloth to prevent accumulation of dust and dirt. -
Page 8: Specification
12. SPECIFICATION PV2412-50 PV2412-60 PV2412-100 P/No. Input Voltage 20-30V Output Voltage 12-13.8V Output Power 50Amp 60Amp 100Amp Continuous 70Amp 80Amp 130Amp Output Power Max ≤90mA ≤90mA ≤110mA Standby Current Input Fuse 2x30A 2x40A 4x30A Efficiency 85~90% Thermal Protection 65C+/-5 C...