Table of Contents
Advertisement
Connect to
Source
If the system does not work properly, see trouble shooting guide in
next section.
TROUBLESHOOTING
The Display shows:
• A black screen
• Screen is distorted
• Noise interference
1. Check that the connectors are in the correct ports of the
source and sink devices – check the labels on the connector
housing to be sure.
2. Ensure that the HDMI plugs are firmly inserted into the
HDMI source and display.
3. Check if the HDMI source and display are powered on and
properly booted.
4. Reset the system by unplugging and re-plugging the source
or display HDMI port.
5. Re-boot the system with the optical HDMI cable system
reconnected.
Connect to
Display
11
Advertisement
Table of Contents
