Advertisement
Quick Links
Q106e Smart Lock User Manual
Instructions to User
• Do not attempt to disassemble or repair the product without
authorization.
• Do not press the keyboard and fingerprint recognition area with
excessive force or sharp objects.
• Make sure the door is fully closed when going out. The
manufacturer is not responsible for any loss caused by your
improper door closing.
• Replace the battery when you hear the alarm of low battery.
• Change your password regularly to ensure security.
• Do not clean the device with corrosive substances to avoid
damaging the protective layer and affecting the smooth surface of
the device.
• Keep your fingers clean when unlocking with fingerprint.
• Please install inside the door or keep the door normally open to
avoid being locked outside the door.
• Keep the mechanical key in a safe and secure place. The
mechanical keys act as a backup, if your password.
• fingerprints or APP don't work, they can prevent you from being
locked outside the door.
Product Specification
Q106e
Model
Zinc alloy
Material
65.4*163.4*31.5mm
Front lock size
72.4*188.4*45.5mm
Rear lock size
1.35kg
Weight of lock
Door opening methods
Tuya APP/Password/
Fingerprint/Key
Four AA (5#) batteries
Power supply
35-55cm
Supported door thickness
50 fingerprints,150 passwords
User capacity
-30℃~+55℃
Operating Temperature
Operating Humidity
<RH 95%
Waterproof and dustproof grade
IP65
Accessories package
Parts List
01
1*Front lock
1*Rear Lock
1*Mounting Plate
1*Deadbolt
1*Strike Plate
4*Strike screws(M4*0.8 in)
2*Interior Assembly Screws (M4*0.4 in)
1*Interior Assembly Screw (M4*1 in)
1*Connection column screw (M4*1.5 in)
4*Mounting Plate Screw(M5*1.8 in/2.2 in)
1*Strike Reinforcer
3*Keys
Product Overview
Front View
Fingerprint reader
Keyboard
Back key
Cylinder
cover
USB emergency power supply interface
Rear View
Battery cover
Setting key
Knob
On/Off key
Screw hole
02
Preparations
Door parameters and specifications
1. Make sure the lock can be installed correctly
① There are no obstacles in the door opening, ensure that the lock
tongue can be extended and retracted normally.
② Compare the position of the hole in the door with the drill
template.
2.Door size
① Diameter of hole in the door (2 '' / 54 mm or 1½'' / 38 mm).
② Distance between the hole center to the door edge (2 '' / 60 mm
or 2¾'' / 70 mm).
③ Door opening diameter (1'' / 25 mm).
④ Door thickness (1 '' / 35 mm - 2 '' / 55 mm).
Indicator
Fingerprint LED
2⅛"
54mm
or
1½"
38mm
Confirm/Close key
Cylinder
3. If the door has been installed with a lock, remove it first,
including the bolts.:
Battery
compartment
Front lock
wiring port
Backset
2⅜" / 60 mm
or 2¾" / 70 mm
Door thickness
1"
1⅜" / 35 mm -
25 mm
2 ⅛" / 55 mm
03
Advertisement
Summary of Contents for Banner Q106e
- Page 1 Preparations Q106e Smart Lock User Manual 1*Front lock 1*Rear Lock Door parameters and specifications 1*Mounting Plate Instructions to User 1*Deadbolt 1. Make sure the lock can be installed correctly • Do not attempt to disassemble or repair the product without 1*Strike Plate authorization.
- Page 2 Install the smart lock Install the deadbolt ① Measure the distance between the hole center to the door edge (2'' / 60 mm or 2¾'' / 70 mm). Strike screws Strike Reinforcer ② If the distance between the hole center to the door edge is 2'' / Strike Plate (M4*0.8 in) (optional)
- Page 3 Install the rear lock Add local administrator Smart lock local function 1. Pull to open the wiring port cover(②), pass the front lock wire 1.Before add local administrator, the smart lock will be in the Calibrate Door Opening Direction through the rear lock, and insert the wire into the socket correctly. initialization state, and it can be opened with any fingerprint or password"123456".
- Page 4 Delete user Virtual password Pair Your Phone with Smart Lock ① Hold the Back key to verify the administrator password. ② When you hear the voice prompt "Press 1 to delete a user", You can add other numbers before and after entering the correct Download the Tuya App from the App Store or Google Play please press 1 to delete a user.
- Page 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.