Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Curtis Manuals
  4. Utility Vehicle
  5. KUBOTA B3200
  6. Installation & owner's manual

Curtis KUBOTA B3200 Installation & Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Rev. A, p. 1 of 12
KUBOTA B3200
Hard Sided Cab p/n 1KB32AS
Soft Sided Cab p/n 1KB32SS
Installation Instructions
The contents of this envelope are the property of the owner.
Be sure to leave with the owner when installation is complete.
APPROXIMATE INSTALLATION TIME: 2 to 3 HOURS
(excluding accessories)
Hard sided cab shown with optional work lights, and optional strobe light.
Additional options available are: heater, hard rear panel, and rear window wiper.
Note: a front windshield wiper comes standard with this cab kit.
manual p/n: IM-1KB32AS

Advertisement

loading
Need help?

Need help?

Do you have a question about the KUBOTA B3200 and is the answer not in the manual?

Questions and answers

Related Manuals for Curtis KUBOTA B3200

Summary of Contents for Curtis KUBOTA B3200

  • Page 1 Rev. A, p. 1 of 12 KUBOTA B3200 Hard Sided Cab p/n 1KB32AS Soft Sided Cab p/n 1KB32SS Installation Instructions The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation is complete.

  • Page 2: Design Concept

    2 of 12 DESIGN CONCEPT Curtis cabs feature an assembly of parts designed for your vehicle which require adjustment and alignment of components to accommodate vehicle variations and provide proper weather protection. For accurate installation, proper operation, and years of satisfaction, please read and understand the installation instructions.
  • Page 3 p. 3 of 12 1. VEHICLE PREP 1.1 Per fig. 1.1, remove the following five (5) items from the tractor: the optional tool box and clamps from the roll bar (if equipped), both grab handles, and both turn signal lights from the fenders (identify the wires for easier re-connection later).
  • Page 4 p. 4 of 12 HARD REAR PANEL hard rear Note: this is a separately purchased option on soft sided cabs. panel It’s a standard included item on hard sided cabs. If installing on a SS cab remove snaps from rear edge of roof. If not installing a hard rear panel, skip to step 5 below.
  • Page 5 p. 5 of 12 SIDE FRAME (cont’d.) 6.2 Per fig. 6.2, use the following hardware installed horizontally into the front of the side frame tubing (into factory installed threaded inserts): three 5/16-18 x 3/4” long button head bolts, three nylon washers, and three steel washers.
  • Page 6 p. 6 of 12 7. WINDSHIELD SUPPORT 7.1 See fig. 7.1. With assistance, install the windshield support to the top front corner of the side frames oriented as shown with the bent flanges on the bottom. In the low- leave empty for now er holes only, use the following hardware per side frame: one 5/16-18 x 1”...
  • Page 7 p. 7 of 12 9. ROOF Use a Phillips head screwdriver to punch a hole ref.: reflectors are back here through the headliner at any of the covered bolt hole lo- cations (8 places). Punch holes from the inside out to avoid having the headliner pull away from its glued sur- face.
  • Page 8 p. 8 of 12 11. REAR CURTAIN 2” wide inner surface If installing a hard rear panel, skip this step and continue of side frame rear with step 12 below. vertical tube 11.1 Assemble the six (6) snaps on the rear curtain to the six (6) snaps on the back side of the roof.
  • Page 9 p. 9 of 12 13. DOORS 13.1 Apply grease to the pin hinges. With assistance, re -install the doors onto the pin hinges. Work the doors back and forth until the hinges are completely seated. If necessary, specific adjustments can be made per the steps below.
  • Page 10 p. 10 of 12 14. TURN SIGNAL LIGHTS 14.1 Per fig. 14.1, re-install the turn signal light to the both washers and nut on this side welded bracket on the back side of the side frames. Use the supplied wires to connect to the existing wiring un- derneath the fender (see fig.
  • Page 11 11 of 12 INDUSTRIES, LLC. KUBOTA B3200 HARD SIDED CAB PARTS LIST WINDSHIELD QTY. ROOF QTY. 8SV-CI02 ROLL BAR 8SV-KB2301A-W1 BRACKET MNT QTY. REFLECTORS WHITE 8SV-KB3205-B4 RAVEN T1 SEAM BULB HINGES RUBBER TYPES: LOGO 3/4" SIDE BULB (20') 3/4" SIDE...
  • Page 12 12 of 12 INDUSTRIES, LLC. KUBOTA B3200 SOFT SIDED CAB PARTS LIST WINDSHIELD ROOF QTY. QTY. 8SV-CI02 ROLL BAR 8SV-KB2301-W1 BRACKET MNT QTY. REFLECTORS WHITE 8SV-KB3205B4 RAVEN T1 SEAM BULB SNAPS (6) (INSIDE) HINGES RUBBER TYPES: LOGO 5/8" SIDE BULB W/ 1/4"...

This manual is also suitable for:

1kb32as1kb32ss