Download Print this page

Kohler Archer K-1122-GHLAW Detailed Planning Dimensions page 2

60" x 32" heated bubblemassage air bath w/ bask

Advertisement

11-1/4"
(286 mm)
16"
(406 mm)
3-1/8"
(79 mm)
3-3/4"
(95 mm)
15-3/16"
(386 mm)
3-1/2"
(89 mm)
1-1/2" Bath Drain
Required Electrical Service
Two dedicated circuits required, protected with Class A Ground-
Fault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Blower, Heated
120 V, 15 A, 60 Hz
Surface:
Heater:
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Three-wall alcove
Basin area, bottom:
45-1/8" x 19-11/16" (1146 mm x
500 mm)
Basin area, top:
52-3/4" x 25-5/16" (1340 mm x 643 mm)
Weight:
106 lbs (48.1 kg)
Minimum floor load:
46 lbs/ft² (224.6 kg/m²)
Water depth:
15" (381 mm)
Water capacity:
58 gal (219.6 L)
Electrical component
Blower: 120 V, 10 A, 60 Hz
rating:
Heated Surface: 120 V, 0.5 A, 60 Hz
Heater: 120 V, 5 A, 60 Hz, 620 W
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-8-2022 03:00 - US/CA
60" x 32" Heated BubbleMassage
60" (1524 mm)
No change in measurements
if connected with drain illustrated. (K-7272)
1-1/4"
(32 mm)
32"
(813 mm)
Integral Flange Detail
Lumbar
1-1/4"
Angle 24°
(32 mm)
20-1/4"
(514 mm)
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Remote blower installation kit is available
for relocating the blower. Provide access for
servicing the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
Archer
air bath w/ Bask
K-1122-GHLAW
3/8"
(10 mm) R
®
®

Advertisement

loading