Advertisement
v 1.0.0
Tromso PCB Instructions
General info
1. USB supports up to 1000HZ real report rate. Support CtoC interface (only suitable for
C-port keyboard)
2. Both USB and Bluetooth modes support NKRO.
3. It can run on Win, Android, 1inux, Apple (shortcut key switch required) and other
operating systems.
4. No EEPROM memory, Flash memory backlight mode.
Lighting Effects
All switch light effects support global control: brightness increase/decrease (a total of 5 levels
default to the fifth level), speed (a total of 5 levels default to the third level).
FN + ↑:
Increase brightness of the keyboard, 5 levels in total
FN + ↓:
Reduce brightness of the keyboard is reduced, 5 levels in total
FN + →:
Speed up the lighting effect, 5 levels in total
FN + ←:
Slowed downs the speed of the lighting effect, 5 levels in total
The above control methods support long-press continuous adjustment, single-press once to
adjust a level, and long-press to continuously adjust more than one level. When the limit value
is reached, the indicator will flash 5 times.
Detailed description of lighting effects:
FN+O:
switch light backlight switch
FN+Z:
switch lighting effect switch, supports 17 kinds of effects.
FN+X:
Backlight color switch
FN+C:
LOGO lighting effect switch
FN+V:
LOGO switch
FN+B:
LOGO color switch
IKKI68 Aurora
Last updated July 24, 2021
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Aurora IKKI68
- Page 1 1.0.0 Last updated July 24, 2021 IKKI68 Aurora Tromso PCB Instructions General info 1. USB supports up to 1000HZ real report rate. Support CtoC interface (only suitable for C-port keyboard) 2. Both USB and Bluetooth modes support NKRO. 3. It can run on Win, Android, 1inux, Apple (shortcut key switch required) and other operating systems.
- Page 2 v 1.0.0 Last updated July 24, 2021 Bluetooth/USB wired settings FN+P (short press) Bluetooth/USB wired mode switch. (The full key light flashes white for 5 seconds) FN+P (long press for 5 seconds) to enter Bluetooth pairing mode. The P key keeps flashing white during pairing, and stops flashing after the pairing is successful.
- Page 3 v 1.0.0 Last updated July 24, 2021 Charging Plug in the USB cable to automatically charge ● When charging, the single backlight below the space bar lights up. ● After full charging, the backlight under the space bar will turn off. ●...
Need help?
Do you have a question about the IKKI68 and is the answer not in the manual?
Questions and answers