1. Manuals
  2. Brands
  3. Simplified MFG Manuals
  4. Matrix Switcher
  5. RM44C
  6. User manual

Simplified MFG RM44C User Manual

4x4 hdmi 2.0 18gbps matrix switch with scaling outputs
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RM44C
4x4 HDMI 2.0 18Gbps Matrix Switch
with scaling outputs
VER 1.0
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RM44C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Simplified MFG RM44C

Summary of Contents for Simplified MFG RM44C

  • Page 1 RM44C 4x4 HDMI 2.0 18Gbps Matrix Switch with scaling outputs VER 1.0...

  • Page 2: Table Of Contents

    10. Warranty and Contact Information ..............21 1. Introduction The RM44C is an 18G HDMI video matrix switch with 4 HDMI inputs and 4 scaling HDMI outputs. Each input and output supports up to 4K60 444 HDMI 18G video. The outputs can be individually scaled for 1080p or 10.2Gbps compatibility (labeled as HDBaseT in the...

  • Page 3: Features

    2. Features • HDMI 2.0b (18Gbps), HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant • Four 18G HDMI 2.0b inputs supporting up to 4K60 444 resolution • Four 18G HDMI 2.0b outputs supporting up to 4K60 444 resolution • Outputs can be individually scaled for 4K→1080p or 10.2 Gbps (HDBaseT mode) •...
  • Page 4 All PC resolutions including 1920 x 1200 Output Scaling 4K to 1080p 3D Support Color Space RGB, YCbCr4:4:4,YCbCr4:2:2, YCbCr 4:2:0 Color Depth 8-bit, 10-bit, 12-bit [1080P, 4K30Hz, 4K60Hz (YCbCr 4:2:0)] 8-bit [4K60Hz (YCbCr 4:4:4)] HDMI Audio Formats PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD Coax Audio Formats...

  • Page 5: Operation Controls And Functions

    Operating 0°C ~ 40°C / 32°F ~ 104°F Temperature Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (non-condensing) Resolution / 4K60 - 4K30 - 1080P60 - Cable Length Feet / Meters Feet / Meters Feet / Meters HDMI IN / OUT 10ft / 3M 30ft / 10M...

  • Page 6: Rear Panel

    5.2 Rear Panel Name Function description TCP/IP (RJ45) Control port for TCP/IP control or accessing the built-in Web GUI. RS-232 3-pin pluggable connector for RS-232 control of the Switcher. IR EXT IR eye input for IR control of the Switcher. Coaxial Audio OUT 1 RCA connector for coaxial audio output from HDMI OUT 1 / OUT 2 / OUT 3 /...

  • Page 7: Operating The Matrix Switch

    5.4 Operating the Matrix Switch 5.4.1 Power LED and Standby Mode The Power LED provides the following indications: Color Description The Matrix is active and fully controllable The Matrix is in standby mode, this state can be changed by using API commands or IR Remote, or from the Web GUI interface.

  • Page 8: Using The Web Gui Interface

    Power on the Switcher or set it to standby mode. Output 1 (Output 2 / 3 / 4) 1/2/3/4 Select the desired input source to Output 1 port output, the corresponding green LED on the front panel illuminates. Switch downscale or bypass mode to the Output 1 port output.
  • Page 9 Select the Username from the list and enter the password. The default passwords are: Username User Admin Password user admin After entering the log in details, click the LOGIN button and the following Status page will appear. ■ Status page The Status page provides basic information about the product Model name, the installed firmware version and the network setting.
  • Page 10 • The Power on button changes the power status of the matrix between On and Stand-by mode. ■ Video page The Video page allows selection of the inputs source and set the presets. To this preset setting, first you need to select the desired input source to four output ports.
  • Page 11 The following EDID options are available in any of the EDID drop-down lists: 1080P, Stereo Audio 2.0 1080P, Dolby/DTS 5.1 1080P, HD Audio 7.1 1080I, Stereo Audio 2.0 1080I, Dolby/DTS 5.1 1080I, HD Audio 7.1 3D, Stereo Audio 2.0 3D, Dolby/DTS 5.1 3D, HD Audio 7.1 4K2K30Hz_444 Stereo Audio 2.0 4K2K30Hz_444 Dolby/DTS 5.1...
  • Page 12 ■ Output page The outputs can also be assigned meaningful names, if desired. The Output page provides information about the signal status of the outputs. The Scaler mode menu provides the following options: Bypass Follow the input source. (Pass-through) 4K→1080P Downscale to 1080p, if needed.
  • Page 13 ■ System page The system page allows setting of the panel lock and beep on/off, control RS-232 port baud rate. This page is also used to install new firmware update, restore the factory default settings and reboot the Matrix.

  • Page 14: Api Control Command

    8. API control command The MTRIX can also be controlled by RS-232. Connect a PC by using a serial cable and open any of a Serial Command tool on the PC such as Comm Operator,Docklight or hercules, etc to send command for controlling the Switcher.
  • Page 15 The ASCII list about the device is shown as below. ASCII Command Serial port protocal: Baud rate：115200 (default), Data bits: 8bit, Stop bits:1, Check bit: None TCP/IP protocal port: 8000 The x, y, z and XXX are parameters. Function description Feedback RS-232 Commands Power...
  • Page 16 r beep! Get buzzer state beep on / beep off s lock z! Lock/Unlock front panel button lock on panelbutton,z=0~1(z=0 lock panel button lock off off,z=1 lock on) r lock! Get panel button lock state panel button lock on/off s save preset z! Save switch state between all output save to preset 1 port and the input port to preset z，...
  • Page 17 s hdmi y hdcp z! Set hdmi output y port hdcp status hdmi 1 hdcp active y=0~4(0=all) z=0~1(1=active,0=off) r hdmi y hdcp! Get HDCP status of HDMI out y, hdmi 1 hdcp active y=0~4(0=all) Audio Setting Turn on/off arc of HDMI output y ， s hdmi y arc z! hdmi output 1 arc on y=0~4(0=all) z=0~1(z=0,off,z=1 on)
  • Page 18 14、4K2K60_420,Dolby/DTS 5.1 15、4K2K60_420,HD Audio 7.1 16、4K2K60_444,Stereo Audio 2.0 17、4K2K60_444,Dolby/DTS 5.1 18、4K2K60_444,HD Audio 7.1 19、4K2K60_444,Stereo Audio 2.0 HDR 20、4K2K60_444,Dolby/DTS 5.1 HDR 21、4K2K60_444,HD Audio 7.1 HDR 22、USER1 23、USER2 24、Copy_From_Hdmi_Tx_1 25、Copy_From_Hdmi_Tx_2 26、Copy_From_Hdmi_Tx_3 27、Copy_From_Hdmi_Tx_4 Network setting r ipconfig! Get the Current IP Configauration IP Mode: Static, IP: 192.168.1.72 Subnet Mask: 255.255.255.0, Gateway: 192.168.1.1...
  • Page 19 static address, set DHCP to “off” first. r ip addr! Get network IP address IP address:192.168.1.100 s subnet xxx.xxx. Set network subnet mask Set subnet xxx.xxx! Mask:255.255.255.0 Please use "s net reboot!" command or repower device to apply new config! DHCP on, Device can't config subnet mask, set DHCP off first.

  • Page 20: Application Example

    Note that you can send ‘RS232 command’ to control the Matrixr via Serial Command tool. The ‘Function description’ explains function about the command. The “Feedback” displays whether the command sends success or not and feedback the information you need to. 9.

  • Page 21: Warranty And Contact Information

    Or b) Replace the product with new or refurbished product. All Simplified MFG products are covered by a 3-year PARTS and LABOR warranty. During this period there will be no charge for unit repair, replacement of unit components or replacement of the product if deemed necessary.
  • Page 22 18 Gbps up to 4K2K@50/60Hz Video (YUV4:4:4),4K2K@30Hz,1080P@120Hz, and 1080P Resolutions 3D@60Hz The RM44C is a compact, robust Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2 4K2K (18Gbps) 4x4 matrix switch. Color Depth 8-bit, 10-bit, 12-bit This switch has 4 HDMI Inputs and 4 HDMI Audio LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digi-...

Table of Contents