1. Manuals
  2. Brands
  3. Ribble Manuals
  4. Bicycle
  5. IWOC ONE
  6. Quick start user manual

Ribble IWOC ONE Quick Start User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
e- B I K E
OW N E R ' S M A N UA L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IWOC ONE and is the answer not in the manual?

Questions and answers

Summary of Contents for Ribble IWOC ONE

  • Page 1 e- B I K E OW N E R ’ S M A N UA L...

  • Page 2: Pre-Ride Checklist

    PRE-RIDE CHECKLIST • Please ensure that there is no play in the headset by rocking the bike backwards and forwards while applying the front brake. • Check the alignment of the hanger that attaches the rear derailleur to the frame. It should be parallel to the floor and not point in towards the wheel.
  • Page 3 IWOC ONE QUICK START USER GUIDE...
  • Page 4 This section refers to Ribble e-bikes equipped with the 2. TURN THE LIGHTS ON/OFF top-tube mounted iWoc One control button. If your bike is equipped with the handlebar-mounted iWoc Trio button, (e-bikes with integrated lights only) please skip to that section of the guide.

  • Page 5: Start-Up Procedure

    The LED may flash PINK to indicate an START error. Connect your smartphone to the bike 1. Press the iWoc One Button to The LED’s will light up GREEN via Bluetooth® to check for an error code. activate the system.

  • Page 6: Battery Charging Level

    BATTERY CHARGING LEVEL The amount of battery charge available to you is displayed via a simple traffic light system. Whenever you press the iWoc button, the LED will always revert to display a single solid colour. The colours listed below outline what each colour represents.
  • Page 7 • Slow Flash Pink = Demo Mode following colours. • Solid Pink = Safe Mode (Contact Ribble for assistance) Your Ribble e-bike includes a handy walk mode function • Rapid Pink Flash = Error (connect bike to app to identify the fault) which provides a little extra assistance should you need to push the bike.
  • Page 8 DEMO Connect your smartphone to SAFE MODE. MODE. It can only be ridden the bike to check for an error Contact Ribble for 50km before all assistance code. Check the error code for assistance. will cease. This can only be...

  • Page 9: Battery Charge Level

    BATTERY CHARGE LEVEL CHOOSING THE ASSISTANCE LEVEL The amount of battery charge available • White = 75% or more remaining to you is displayed via a simple traffic • Green = 50-75% light system. Whenever you press Increase Assist Level •...

  • Page 10: Temperature Control

    BATTERY CHARGE LEVEL Do plug the charge into a household power socket and then into the charging port on the bike. The light on the iWoc ONE control button CHARGING CAPACITY will turn on automatically. While charging, the LED will change colour depending upon what state of charging it has reached.

  • Page 11: Maintenance

    DO’S & DON’T’S MAINTENANCE DO’S & DON’T’S MAGNETIC LOCKRING CHARGING PORT 1. Always clean the bike regularly, especially after wet rides. Avoid using pressure washers or hosepipes. Do not insert any metal objects 2. Check the magnetic lockring is clean and in place. into the charging port and 3.

  • Page 12: Frequently Asked

    FREQUENTLY ASKED QUESTIONS...
  • Page 13 Available range is dependant upon several factors from the bike. When connected to the bike it will charge Very rarely the motor system may encounter an issue. Bikes equipped with the iWoc ONE top tube control including rider weight, route profile, rider fitness, weather the main battery when stationary or supplements it, with button will flash PINK to indicate a fault exists.
  • Page 14 LED has stopped flashing If the problem persists, contact Ribble for assistance. PINK. Restart the system. If the problem persists, contact Ribble for assistance. 12. Driver Error Undervoltage If the error persists, contact Ribble for assistance.
  • Page 15 If the error persists, contact Ribble for battery replacement. Short circuit at the power output. Check the port is in good temperature of the cells increase. Continue charging. condition. If it is, contact Ribble for the part to be replaced. 206. Discharge Over Temperature 201. Imbalance Excessive temperature during use.
  • Page 16 Visit one of our bike showrooms for expert advice on buying and sizing your new Ribble bike Ribble Cycles Customer Services 01772 963400 customerservice@ribblecycles.co.uk /RibbleCycles /RibbleCycles /ribble_cycles /Team Ribble...

Table of Contents