Page 2
HYSTERESIS // CREDITS SOFTWARE DEVELOPMENT: Thomas Hennebert : WEBSITE Ivo Ivanov WEBSITE PRESET DESIGN & BETA TESTING: Ivo Ivanov : WEBSITE Thomas Hennebert : WEBSITE Hans Besselink : WEBSITE PRODUCT GRAPHICS: 3D Product Graphics - Patrick Defasten / DEFASTEN :...
Page 3
Presets from versions earlier than 1.3 are not compatible. If necessary, you should back up any sessions that utilize previous versions of Hysteresis before running the update. Hysteresis is a stereo plugin; be sure that you are instantiating it on a stereo track. 1. Unpack the HYSTERESIS.zip file 2.
Page 4
HYSTERESIS INTERFACE OVERVIEW: The input signal first goes through a delay line on each stereo channel, but instead of sending the output directly back into the delay line, the resulting signal is sent to a stutter processor, then to a lowpass filter and finally to another delay line on the opposite channel which is modulated for creating chorus type effects.
Page 5
0% stops the playback. Range : 0% to 400% MIX : crossfades between the normal feedback signal and the output of the stutter effect. Range : 0% to 100% REV : when switched on, the looped signal will be played backwards ® VERSION 1.3 GLITCHMACHINES...
Page 6
RESONANCE : the filter resonance at the cutoff frequency MOD FX: This effect is applied to the output of the filter but happens on the opposite audio channel. It’s then routed back to the feedback input of the first delay on the original channel. ® VERSION 1.3 GLITCHMACHINES...
Page 7
LEVEL : adjust the amplitude of the processed output signal in decibels (-70 to +6 dB). PANIC BUTTON : Resets the delay lines and feedback parameters You can press the panic button in case of unwanted signal spikes ® VERSION 1.3 GLITCHMACHINES...
Page 8
OPEN PRESETS FOLDER: A shortcut to the system folder where the plugin’s presets are stored. The plugin’s current version is displayed at the bottom of the config menu Thanks for downloading HYSTERESIS! Please check out the rest of our products at our website: https://glitchmachines.com/ ®...
Need help?
Do you have a question about the HYSTERESIS and is the answer not in the manual?
Questions and answers