Page 1
Orbit 20 Pro Floor Finisher Parts and Instruction Manual Minuteman International, Inc. A Member of the Hako Group 988777 Rev A 09/21...
Page 2
PREFACE Thank you for your purchase of the new industry standard for scrubbers. Minuteman International takes great pride in off ering the most dependable, reliable and best value in industrial power sweepers and sweeper / scrubbers. We set the standard.
Avoid moving parts. Do not wear loose jackets, shirts, or sleeves when working on machine. • Do not clean machine with a pressure washer. • Authorized personnel must perform repairs and maintenance. Use Minuteman supplied replacement parts. Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 3...
If you require service, contact the dealer from which the machine was purchased or an authorized Minuteman representative. Always refer to your limited Warranty for complete service information. The model, type, and serial number are indicated on the data plate on the side of the handle. From prompt and...
• Non-marking, 2x6” ball bearing wheels • Multiple position handle adjustment for operator comfort and safety Comfortable vinyl handle grips for ease of use • Full wraparound dust skirt Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 7...
• Your Orbit 20 Pro Floor Finisher is equipped with a safety switch lock and power switch triggers designed for your safety. Do not attempt to bypass or defeat the safety switch lock. Never use any device to lock the power switch triggers in the “ON”...
This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in Figure 1. Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 9...
To stop the machine, simply release the triggers. The safety switch lock will automatically return to the engaged position Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 10...
Guidelines for Operation • Your Orbit 20 Pro Floor Finisher is a very sensitive, powerful unit. When in operation, it should be guided gradually and smoothly without sudden or rough motions. You will want to practice with your machine on a smooth surface until you have experience in operating it.
The handle can be adjusted to any desired work position by simply pulling on the pull pin and move the handle to the desired position. Firmly push the pull pin back into the adjustment holes. This will lock the handle in position. Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 12...
Cleanup and Storage After being used, your Orbit 20 Pro Floor Finisher can be wiped clean with a soft damp cloth and should be stored in a clean, dry place. Orbit 20 Pro Floor Finisher 988777 Rev A 09/21...
ECCENTRIC KIT INC IN KIT2041 ECCENTRIC - INC IN KIT2041 SET SCREW INC IN KIT2041 ECCENTRIC PAD DRIVER SCREWS INC IN KIT2041 PAD DRIVER SCREWS INC IN KIT2041 MOTOR KEY Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 20...
Page 21
HANDLE MOUNTING HWDR KIT INC IN KIT2026-1 BOLT HEX .500-13 X 3 INC IN KIT2026-1 NUT HEX .500-13 NYLOC INC IN KIT2026-1 FLAT WASHER INC IN KIT2026-1 WASHER SPRING WAVE Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 21...
Page 22
SWITCH INC IN KIT1005 WASHER FLAT- ZINC INC IN KIT1005 WASHER FLAT 5/16 USS - ZINC INC IN KIT1005 WASHER 3/8 INTRNL TOOTH LOC-ZINC INC IN KIT1005 SWITCH INSULATION Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 22...
Page 23
SCREW 10-24 X .50 THIRD ROLL PHILL PAN ZINC INC IN KIT2033 WASHER # 10 EXTERNAL TOOTH LOCK - ZINC INC IN KIT2033 LOOP CLAMP INC IN KIT2033 GROMMET IN HANDLE Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 23...
Warranty Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 26...
Page 27
Orbit 20 Pro Floor Finisher 988777 Rev A 09/21 Page 27...
Page 28
“Excellence Meets Clean” Minuteman is a Full Line Manufacturer of Sweepers and Scrubbers, for Industrial Facilities. 14N845 U.S. Route 20, Pingree Grove, IL 60140 USA Phone (800) 323-9420 - www.minutemanintl.com A Member of the Hako Group 988777 Rev A 09/21...