Page 1
Orvis Massage Table Available in 3 Colours Orvis Massage Table Setup Guide Congratulations on the purchase of your new portable massage table. Your new table has been skillfully crafted to exacting standards, utilizing high quality components and materials. With proper use and care, as outlined in this user’s guide, your table should last for years of reliable performance.
Opening The Table 1. Place the table on 2. Release the table clasps, partially 3. Open all four legs of the table its rubber feet, the open the table, and remove the to full extension. handles should be up. accessories (headrest, armrest shelf and two side armrests).
Page 3
Reiki end panels Our lightest wooden model Using the breath hole (instead Both ends of the table have an The Orvis is our lightest and of the headrest) allows you to arch design allowing the you to most-portable wooden massage...
Page 4
Table Weight Limits Positioning the client in the center of the table will help distribute the weight evenly and insure stability. Gently sit near (not on) the center of the table at first, then sit as close to the center (from the edge) as possible, the working weight is the combined weight of the client and the maximum amount of downward pressure being applied by the therapist.
Page 5
lint-free cloth. More stubborn stains may require professional cleaning. Note: Never use harsh or abrasive cleaners or chemicals to clean the table. Doing so may damage the upholstery. Avoid using any protectants, as they may harm the PU leather. Wood care Your massage table is made of select hardwoods and is finished with lacquer that requires no special care.
Need help?
Do you have a question about the Orvis and is the answer not in the manual?
Questions and answers