Advertisement
Quick Links
Advertisement
Related Manuals for Aerospace Audio Atmosphere v2
Summary of Contents for Aerospace Audio Atmosphere v2
- Page 1 INSTRUCTION MANUAL...
- Page 2 Daisy chain power supplies are not recommended, and may introduce undesirable noise. The use of Aerospace Audio equipment is an agreement to the Terms of Service found at aerospaceaudio.com/terms, which are subject to change without notice. Atmosphere is an output only device, not an “FX pedal.” Never send a signal into Atmosphere’s output jacks (ie.
- Page 3 Patch Select: Up Key Select: Up Hold to enter Setlist View Hold for Settings Hold to exit Setlist View Up (Settings & Setlist) Key Select: Down Patch Select: Down Hold to clear Setlist Hold to save to Setlist Down (Settings & Setlist) Abort Engage Hold for Cut Mode...
- Page 4 Control Descriptions Key Up Navigates key selection while in Live View. Navigates setlist while in Setlist View. Navigates menu while in Settings. Hold for 3 seconds enter Settings. Key Down Navigates key selection while in Live View. Navigates setlist while in Setlist View. Navigates menu while in Settings.
- Page 5 Do NOT simultaneously power Atmosphere via a 9v power supply and USB cable. Atmosphere will be overpowered and damaged as a result. The use of an isolated power supply is recommended for powering all Aerospace Audio equipment. Daisy chain power supplies are not recommended, and may introduce undesirable noise.
- Page 6 Live View The standard view for using Atmosphere. 1. Select a patch. 2. Select a key. 3. Press Engage. Seamlessly crossfade between patches and keys by pressing Engage again after cuing up a new selection. Press Abort to smoothly fade to silence. Setlist View Build build and cue a setlist of presets.
- Page 7 Settings Hold Key Up for 3 seconds to enter Settings. Navigating Settings Key Up = up Key Down = down Engage = enter Abort = back Description of Settings Output Adjusts the output volume of Atmosphere. "0 dB" or "+3 dB" is recommended for most contexts. Fadetime Duration of crossfade, fade in, fade out, and loop fading.
- Page 8 Loading New Sounds to Atmosphere About AeroPads AeroPads are immersive pads and soundscapes inspired by space. They are already pre-formated for Atmosphere. AeroPads come in WAV/MP3 format that can also be used in any audio/video editing software. Step 01: Download AeroPads Soundpacks Visit https://www.aerospaceaudio.com/aeropads to download new AeroPads Soundpacks.
- Page 9 Loading Your Own Sounds to Atmosphere Your own WAV files can also be loaded to following the previous steps. Accepted File Type Atmosphere currently only accepts 16 bit 44.1 kHz WAV files. File Naming Structure Atmosphere requires files to follow a strict naming structure in order to be recognized. Files should be named "[key/note].wav"...
- Page 10 files much easier and less frustrating. It takes less than a few minutes to install. Customizing LED Colors On Atmosphere v2, LED colors can be customized by modifying the second line of the “patchsettings.txt” file. Color code must be in hex format and include the “#”.
- Page 11 It sounds like Loop is turned off. Review Settings instructions on page 07 to re-enable it. How can I get in touch for additional help? For contact, send an email to contact@aerospaceaudio.com or a message to @aerospaceaudio on Instagram, Facebook, or TikTok. COPYRIGHT © 2021 AEROSPACE AUDIO. ALL RIGHTS RESERVED OCTOBER 2022.. www.aerospaceaudio.com...
Need help?
Do you have a question about the Atmosphere v2 and is the answer not in the manual?
Questions and answers