Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for BELLOTA FWB01
- Page 1 3-IN-1 FOLDING WORKBENCH 3-in-1 Work Station...
- Page 2 If you have any questions relative to a particular application, DO NOT use the workbench until you have first contacted Bellota to determine if it can or should be performed on the product.
- Page 3 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. CAUTION: Do not allow persons to operate or assemble this workbench until they have read this manual and have developed a thorough understanding of how the unit works.
- Page 4 ⚫ DO NOT USE SCAFFOLD MODE WHEN THE LEGS ARE FULLY EXTENTED. Always use this product on a stable, level surface. Failure to use properly or overload may result in serious personal injury. ⚫ When using this product with power tools, please refer to the manufacturer's instructions for guidance on usage.
- Page 5 Workbench Mode 1. Firstly, set up the legs by following the same steps as detailed with scaffold mode section. 2. Pull up the let switch on the side of each leg to release them, then pull the inner legs out to the workbench height 80 cm. There are 3 locking positions, each for a height.
- Page 6 WARNING: DON’T USE SCAFFOLD MODE WITH LEGS FULLY EXTENDED. MAINTENANCE ⚫ Maintain your workbench. It is recommended that the general condition of any workbench be examined before it is used. Keep your workbench in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Need help?
Do you have a question about the FWB01 and is the answer not in the manual?
Questions and answers