1. Manuals
  2. Brands
  3. Torpedo7 Manuals
  4. Bicycle Accessories
  5. TAG-A-LONG T7
  6. Owner's manual

Torpedo7 TAG-A-LONG T7 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
(Please keep this Owner's Manual for future reference. If you sell or give this product to
someone, please include this Owner's Manual, and ask the new owner's to read the instructions
completely before operating.)
 Please read this Owner's Manual completely before assembling or operating this product.
 Assembly of this product should be carried out by an adult.
 Parts are wrapped in paper or protective covering to prevent damage during shipment.
Remove all parts and packing materials from the box prior to assembly. Save all packing
materials until assembly is complete to make sure no parts are accidentally thrown away.
After assembly is complete, properly discard all waste.
 Refer to the Parts List and Diagram on page two of this manual to make sure all parts are
accounted for.
This unit is designed to fit and attach securely to most adult bicycles using a wheel size of
26" (66cm) through to 29" (74cm).
It should not be fitted to bicycles with 20" or 24" wheels, as they may not have enough
pedal clearance between the Tag-a-long pedals and the ground when leaning or turning.
WARNING Always wear an approved safety helmet when riding!
WARNING Never leave your child unattended on this product!
WARNING This Tag-a-long does not have a brake. Make sure the adult bike brakes function properly!
WARNING Recommended for ages 5 plus. Maximum weight capacity of rider is 34 kg!
WARNING Make sure the child riding the Tag-a-long understands how to operate it correctly!
WARNING A bicycle with the Tag-a-long attached requires a wide turning radius! Use caution when
turning!
WARNING Do not ride over curbs! Avoid bumps and potholes! Do not turn sharply!
WARNING Before riding, check that all parts are assembled correctly per the manufacturers instructions!
WARNING Tire should be inflated to the pressure reading shown on the tire sidewall! Check before each
use!
WARNING Use a foot pump or hand pump to inflate tires! Pressurised air hoses can cause over-inflation!
WARNING Do not ride at night!
WARNING Do not ride barefoot!
WARNING Do not ride in wet weather or when road surface is slippery!
WARNING Periodically re-check all fasteners to make sure they are tight!
WARNING Before riding, check and ensure the coupler connection with adult bike correctly!
WARNING We recommend using only a high quality seat post to tow the Tag-a-long. Seat posts made of
thin alloy, steel, or carbon fiber, could bend or break.
TAG A LONG
Owner's Manual

PRIOR TO ASSEMBLY:

BICYCLE COMPATIBILITY:

IMPORTANT SAFETY INFORMATION:

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TAG-A-LONG T7 and is the answer not in the manual?

Questions and answers

Summary of Contents for Torpedo7 TAG-A-LONG T7

  • Page 1 TAG A LONG Owner’s Manual (Please keep this Owner’s Manual for future reference. If you sell or give this product to someone, please include this Owner’s Manual, and ask the new owner’s to read the instructions completely before operating.) PRIOR TO ASSEMBLY: ...
  • Page 2 TOOLS REQUIRED FOR ASSSEMBLY:  Adjustable wrench  6mm Allen key FULLY ASSEMBLED TAG-A-LONG PARTS LIST DESCRIPTION Frame w/ folding Tag-a-long arm, wheel, chain (w/ guard) and crank pre-assembled Coupler Handlebar w/ grips Handlebar pad w/ cover Seat post assembly w/ padded seat Right pedal Left Pedal Rear Reflector...
  • Page 3 ASSEMBLY AND OPERATING INSTRUCTIONS STEP 1 Tag-a-long arm 1. Extend the Tag-a-long arm until the two sections meet flush. 2. Insert the quick release through the two sections and tighten securely. The quick release should be secured very firmly in place. STEP 2 Attach the handlebar 1.
  • Page 4 STEP 4 Attach the pedals to the cranks 1. Thread the right pedal clockwise into the right crank arm (the side with the chain) by hand. Tighten using an adjustable wrench. 2. Thread the left pedal counter-clockwise into the left crank arm (the side opposite the chain) by hand.
  • Page 5 STEP 6 Attach Tag-a-long to adult bike and secure seat post clamp 1. Unscrew all the screws from the coupler using 6mm Allen key. 2. Attach the coupler to the adult bike 2.1 Assemble the clamp onto the seat post of adult bike, insert all four screws back into the clamp, and tighten with your fingers.
  • Page 6 3.2 Screw the nut over the threaded end of the pin and tighten with your fingers. 3.3 Clamp the quick-release lever all the way down 4. Position the Tag-a-long behind the adult bike so the coupler, Tag-a-long arm and bike are in a straight line.
  • Page 7 STEP 9 Straddle the adult bike while the child climbs onto to Tag-a-long The adult should straddle the adult bike while the child climbs onto Tag-a-long. WARNING! The adult bike kickstand is not designed to support the additional weight of the child seated on the Tag-a-long.
  • Page 8 2. Lube the chain monthly, or as needed, with bicycle chain oil. 3. Check all fasteners before each use to make sure they are secure. Accessories for your Tag-a-long Additional Coupler Kits allow you to switch the Tag-a-long from one bike to another quickly and hassle free.

Table of Contents