Sensear smartPlug Manual page 10

Short-Range (SR) is a technology enabling communication directly
between compatible smartPlugs™. Short-Range units tuned to the same
channel and within range will hear your transmissions. SR behaves
similarly to Two-Way Radios, where only one unit can transmit at one
time.
If Short-Range is installed on your smartPlug™, the following applies:
By default, Short-Range is disabled and must be enabled. To enable
Short-Range press Volume Up and Volume
Down buttons simultaneously, the
smartPlug™ will make a tone
indicating SR has been enabled.
Headset-to-Headset Communication
with SR: To communicate with other
smartPlugs™, push and hold the
Inline 2 Button and talk. Other
smartPlugs™ within range and tuned
to the same frequency will hear your
transmissions.
SR Change Frequency Channel:
To change SR channel up press
and hold Volume Up. To change
SR channel down press and hold
Volume Down. The smartPlug™
will speak the channel number.
Up to 8 channels can be
programmed.
The SR frequency can only be set
by your dealer. Please contact
your dealer for reprogramming
of channels.
USING SHORT-RANGE
DOC00071 smartPlug™ Manual rev 02
Vol u
me Up
B utton
Vol ume
Down B utton
Inline 2 Button
8