Lenovo ThinkPad X30 2672 Hardware Maintenance Manual page 61

Indicator
2
Wireless
status
3
Battery
status
4
Standby
status
5
Power on
6
Caps lock
7
Num lock
8
Drive in
use
9
Ethernet
status
Meaning
Green:
Wireless is operational and radio on state.
This indicator is on when the data is
transmitted.
Green:
The battery is in use and has enough
power. The ac adapter has charged the
battery completely.
Blinking green:
The battery is being charged, but still has
enough power to operate. (At regular
intervals, the indicator light turns off briefly.)
Orange:
The battery is being charged, but the
battery power is still low.
Blinking orange:
The battery needs to be charged. When
the indicator starts blinking orange, the
computer beeps three times.
Green:
The computer is in standby mode.
Blinking green:
The computer is entering standby mode or
hibernation mode, or is resuming normal
operation.
Green:
The computer is on and ready to use. This
indicator stays lit whenever the computer is
on and is not in standby mode.
Green:
Caps Lock mode is enabled. To enable or
disable Caps Lock mode, press the Caps
Lock key.
Green:
The numeric keypad on the keyboard is
enabled. To enable or disable the keypad,
press and hold the Shift key, and press the
NumLk (ScrLk) key.
Green:
Data is being read from or written to the
hard disk drive, the diskette drive, or the
drive in the Ultrabay device. When this
indicator is on, do not put the computer into
standby mode or turn off the computer.
Note: Do not move the system while the
Green drive in use light is on. Sudden physical
shock could cause drive errors.
Green:
The computer connects to a LAN and a
session with the network is available.
Blinking yellow:
Data is being transmitted.
ThinkPad X30, X31, X32
Product overview
57