Replacing the battery
Replacing the battery
1. Turn off the computer, or enter hibernation mode. Then disconnect the ac
adapter and all cables from the computer.
Note: If you are using a PC Card, the computer might not be able to enter
2. Close the computer display, and turn the computer over.
3. Slide the battery latch to unlock it 1 ; then remove the battery 2 .
Note: The first position of the battery latch is for releasing the lock of the
4. Align the side of a fully charged spare battery with the side of the battery
space in the computer 1 ; then gently push the battery into the space 2 .
5. Slide the battery latch to lock it.
6. Turn the computer over again. Connect the ac adapter and the cables to
the computer.
32
®
ThinkPad
T30 Series Service and Troubleshooting Guide
hibernation mode. If this happens, turn off the computer.
battery.