Related Manuals for high pointe 50F11
Summary of Contents for high pointe 50F11
- Page 1 Range Hood Model:50F11 Read these instructions carefully before using your range hood, and keep it carefully. If you follow the instructions, your hood will provide you with many years of good service.
- Page 2 Installation/User Instructions - Horizontal Outlet Range Hood 12Volt DC. Models covered: 50F11,55F11,60F11 Caution! For general ventilating use only. Do not use to exhaust hazardous or explosive materials or vapors. Caution! Do not allow insulation, ceiling finishing materials, roofing materials, or other debris to enter the fan housing or ductwork.
- Page 3 INSTALLATION Mark centerline of range on wall and underside of cabinet and measure 5" from each side of centerline on wall. Cut 10” x 2 7/8” hole located 1 13/16” down from rear cabinet edge, centered left to right with range centerline through wall.
- Page 4 Range Hood User Instructions WARNING ! TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: Never leave surface units unattended at high settings. Boil overs cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings. Always turn hood ON when cooking at high heat or when cooking flambéing food.
Need help?
Do you have a question about the 50F11 and is the answer not in the manual?
Questions and answers
Trying to replace the lamp in my high point 50f11 vent a hood but can’t find the lamp or part number. Can you help me find the lamp?
The lamp part number for the High Pointe 50F11 vent hood is trade #912 or #921 for 12VDC recreational vehicle fan units.
This answer is automatically generated