HIKVISION EXIR DS-2XS6A25G0-I/CH20S40 How To Set Up page 7

(3) Connecting to HIK-Central
 Within camera web page go to:
Network-Advanced settings-Platform Access.
Choose "ISUP" in "Platform Access mode" & enable.
Once enabled enter the following credentials:
 Server address: This is the IP address of the HIK-Central server
 Port: This is the ISUP Registration Port being used by the server
 Device ID: As below this can be personalized
 Key: Choose a personalized key / passcode
Once completed press save.
Next open up HIK-Central web page
 Within web page go to:
Physical view-Encoding device. Populate the following information like below:
 Device ID: This is the personalised ID entered in previous section in camera
webpage
 Enter Key: This is the personalised passcode that was entered in previous
section in camera web page
 Enter device name: Name of the camera entered in previous section
6
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
DS-2XS6A25G0-I/CH20S40