Huawei AC6605 Manual page 35

AC6605 Access Controller
Dual-Link Backup White Paper

Configuration on the switch is as follows:



Figure 1-14 Dual-link backup in Layer 3 chain networking (direct forwarding)
IP: 30.30.30.1/24
# Wireless-side configuration file of AC1
#
sysname AC1
#
vlan batch 40 3010 3931
#
Issue 01 (2012-05-30)
of the IP address pools to 40.40.40.2, which is the IP address of VLANIF40. (Interfaces
between the switch and AP belong to VLAN 40).
Configure the Option 43 field with the IP addresses of the active and standby ACs.
Configure static routes from the ACs to the switch.
Create VLANs 40, 3010, and 3931. Assign IP address 40.40.40.2 to VLANIF40 and
assign IP address 30.30.30.5 to VLANIF 3010. The switch uses the IP address of
VLANIF40 to communicate with APs. VLAN 3010 is the management VLAN of APs.
Enable DHCP relay and specify IP addresses of the two ACs as the DHCP server
addresses for the DHCP relay agent.
Set the default VLAN of GigabitEthernet 0/0/1 and GigabitEthernet 0/0/2 to VLAN 3010,
and configure the two interfaces to allow VLAN40, VLAN 3010 and VLAN 3931. Set
the default VLAN of GigabitEthernet 0/0/3 to VLAN 40 and configure the interface to
all VLANs.
AC1
GE0/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VLAN 3010: management VLAN
VLAN 3931: service VLAN
VLAN 3931
VLAN 3010
GE0/0/1 GE0/0/1
GE0/0/2
GE0/0/3
VLAN 40
AP
1 Dual-Link Backup
AC2
IP: 30.30.30.2/24
Switch
IP: 30.30.30.5/24
IP: 40.40.40.2/24
30