sensorswitch WSX 2P Instructions

SPECIFICATIONS
PHYSICAL SPECS
SIZE: 2.74"H x 1.68"W x 1.63"D (6.96 cm x 4.27 cm x 4.14 cm)
(not including ground strap)
WEIGHT: 5 oz
MOUNTING: Single Gang Switch Box
MOUNTING HEIGHT: 30-48 in (76.2-121.9 cm)
SILICONE FREE
ROHS COMPLIANT
ELECTRICAL SPECS
MAXIMUM LOAD / POLE (RELAY)
800 W @ 120 VAC
1200 W @ 277 VAC
1500 W @ 347 VAC
COVERAGE PATTERN
• Small motion (e.g. hand movements) detection up to 20 ft (6.10 m), ~625 ft
• Large motion (e.g. walking) detection greater than 36 ft (10.97 m), ~2025 ft
• Wall-to-wall PIR coverage
• Units with -PDT (Passive Dual Technology) option
(also called Microphonics) provide overlapping
detection of human activity over the complete
PIR coverage area. Advanced filtering is utilized
to prevent non-occupant noises from keeping
the lights on.
CONVERSION FROM GROUND ONLY (NO NEUTRAL) TO NEUTRAL WIRING
This product is pre-configured for wiring without a neutral; however, if connection to neutral is required by code, contractors can quickly and easily convert the unit in seconds.
Step 1:
Remove Yellow
Label
WIRING TO GROUND (NO NEUTRAL)
DUAL RELAY
GND
N H
BLU
BLK
LOAD 2
BLU
BLK
Notes:
- Unit will draw power from either line connection.
- When switching 277 VAC or 347 VAC on both relays, the
line inputs must be of the same phase.
Sensor Switch 900 Northrop Road, Wallingford, CT 06492 Phone: 1.800.PASSIVE sensorswitch.com ©2013 Acuity Brands Lighting, Inc. All rights reserved 09/05/13
WSX 2P
INSTRUCTIONS
MINIMUM LOAD: None
MOTOR LOAD: 1/4 HP
FREQUENCY: 50/60 Hz (timers are 1.2x for 50 Hz)
ENVIRONMENTAL SPECS
OPERATING TEMP
Standard: 14º to 122º F (-10º to 50º C)
LT Option (PIR): -40º to 122º F (-40º to 50º C)
LT Option (PDT): -4º to 122º F (-20º to 50º C)
RELATIVE HUMIDITY:
Standard: 20 to 75% non-condensing
LT Option: 20 to 90% non-condensing
(electronics coated for corrosion resistance)
2
2
SI DE V I EW
1.2 m
4 ft
m
0 3 6
0 ft 9 18
Small motion
detection to ~20 ft
Large motion detection to >36 ft
Step 2:
Loosen Screws and
Remove Metal Link
WI RE COLOR K EY
120/277 VAC WIRING
H N
BLACK* - Line 1 Input
BLACK* - Load 1 Output
BLUE* - Line 2 Input
BLUE* - Load 2 Output
LOAD 1
347 VAC WIRING (-347 Option)
Red wires replace Black wires.
FAMILY
WSX PDT 2P
20 6 Small Small
motion motion
detection detection
to ~20 ft
10 3
9 12
0 ft 12 0 m 9 6
27 36
36 30 20
Step 3:
Connect Neutral to
Silver Screw and
Ground to Green Screw
WIRING TO NEUTRAL
DUAL RELAY
}
*BLACK wires
N H
can be reversed
}
*BLUE wires
BLU
LOAD 2
can be reversed
BLU
Notes:
- Unit will draw power from either line connection.
- When switching 277 VAC or 347 VAC on both relays, the
line inputs must be of the same phase.
WSX 2P WSX 2P NL
WSX PDT 2P NL
TOP V I EW
3 0 m 3
10 0 ft 10
Small motion ~40 ft coverage
N H
GND
BLK
LOAD 1
BLK
6 9 1
20 30
N
1 of 2